ZSI 2.5/LD 120AC SW
Product image
ZSI 2.5/LD 120AC SW

ZSI 2.5/LD 120AC SW

Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, Direct mounting

Tuotteen tunnus 1315900000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 44 Samankaltaiset tuotteet 22
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Material data System specifications Additional technical data Conductors for clamping (additional connection) Conductors for clamping (rated connection) Display element Fuse terminals General Rating data Important note Product images Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, Direct mounting  
Order No.
1315900000  
Type
ZSI 2.5/LD 120AC SW  
GTIN (EAN)
4050118119008  
Qty.
50  items

Dimensions and weights

Depth
73  mm
Depth (inches)
2,874  inch
Depth including DIN rail
74  mm
Height
79,5  mm
Height (inches)
3,13  inch
Width
7,9  mm
Width (inches)
0,311  inch
Net weight
21,22  g

Temperatures

Storage temperature
-25 °C...55 °C  
Ambient temperature
-5 °C…40 °C  
Continuous operating temp., min.
−50  °C
Continuous operating temp., max.
120  °C

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7cI  
REACH SVHC
No SVHC above 0.1 wt%  

Material data

Material
Wemid  
Colour
black  
UL 94 flammability rating
V-0  

System specifications

Version
Tension-clamp connection  
Fuse cartridge  
with LED  
for plug-in cross-connector  
One end without connector  
End cover plate required
Yes  
Number of potentials
1  
Number of levels
1  
Number of clamping points per level
2  
Number of potentials per tier
1  
Levels cross-connected internally
No  
PE connection
No  
Rail
TS 35  
N-function
No  
PE function
No  
PEN function
No  

Additional technical data

Explosion-tested version
No  
Installation advice
Direct mounting  
Number of similar terminals
1  
Open sides
right  
Type of mounting
Snap-on  

Conductors for clamping (additional connection)

Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2,5  mm²
Connection direction
top  
Connection type, additional connection
Tension-clamp connection  

Conductors for clamping (rated connection)

Blade size
0.6 x 3.5 mm  
Clamping range, max.
4  mm²
Clamping range, min.
0,13  mm²
Connection cross-section, stranded, max.
4  mm²
Connection cross-section, stranded, min.
0,5  mm²
Connection direction
Inclined / angled  
Gauge to IEC 60947-1
A3  
Number of connections
2  
Stripping length
10  mm
Type of connection
Tension-clamp connection  
Type of connection 2
Tension-clamp connection  
Wire connection cross section AWG, max.
AWG 12  
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section, finely stranded, max.
4  mm²
Wire connection cross section, finely stranded, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5  mm²
Wire connection cross-section, solid core, max.
4  mm²
Wire connection cross-section, solid core, min.
0,5  mm²

Display element

Type of voltage for indicator
AC/DC  

Fuse terminals

Cartridge fuse
G-Si. 5 x 20  
Fuse holder (cartridge holder)
Pivoting  
Power loss for overload and short-circuit protection for a composite arrangement
1.6 W at 6.3 A @ 41°C  
Power loss for overload and short-circuit protection for an individual arrangement
2.5 W at 2.5 A @ 27°C  
Power loss for short-circuit protection only for a composite arrangement
2.5 W at 6.3 A @ 55°C  
Power loss for short-circuit protection only for an individual arrangement
4.0 W at 6.3 A @ 52°C  
Type of voltage for indicator
AC/DC  

General

Installation advice
Direct mounting  
Rail
TS 35  
Standards
IEC 60947-7-3  
Wire connection cross section AWG, max.
AWG 12  
Wire connection cross section AWG, min.
AWG 26  

Rating data

Rated cross-section
2,5  mm²
Rated voltage
120  V
Rated voltage to adjoining terminal
500  V
Rated DC voltage
120  V
Rated current
6,3  A
Current at maximum wires
6,3  A
Standards
IEC 60947-7-3  
Volume resistance according to IEC 60947-7-x
1,33  mΩ
Rated impulse withstand voltage
6 kV  
Power loss in accordance with IEC 60947-7-x
0,77  W
Pollution severity
3  

Important note

Product information
The voltage depends on the selected fuse element or the selected indicator light  

Product images

Classifications

ETIM 6.0
EC000899  
ETIM 7.0
EC000899  
ETIM 8.0
EC000899  
ETIM 9.0
EC000899  
ETIM 10.0
EC000899  
ECLASS 9.0
27-14-11-16  
ECLASS 9.1
27-14-11-16  
ECLASS 10.0
27-14-11-16  
ECLASS 11.0
27-14-11-16  
ECLASS 12.0
27-14-11-16  
ECLASS 13.0
27-25-01-13  
ECLASS 14.0
27-25-01-13  
ECLASS 15.0
27-25-01-13