DRMKITP230VAC 4CO LD/PB
Product image
Similar to illustration
DRMKITP230VAC 4CO LD/PB
Wiring diagram
DRMKITP230VAC 4CO LD/PB
Graph
DC load limit curve
Resistive load
DRMKITP230VAC 4CO LD/PB
Graph
Electrical service life
DRMKITP230VAC 4CO LD/PB
Graph
Derating curve
DRMKITP230VAC 4CO LD/PB
Graph
AC operational voltage range
DRMKITP230VAC 4CO LD/PB
Dimensional drawing
Relay in combination with base
DRMKITP230VAC 4CO LD/PB
Miscellaneous
Type codes

DRMKITP230VAC 4CO LD/PB

D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 230 V AC, Continuous current: 5 A, PUSH IN, Test button available: Yes

Tuotteen tunnus 2576060000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 13 Yksittäiset osat 3 Samankaltaiset tuotteet 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 230 V AC, Continuous current: 5 A, PUSH IN, Test button available: Yes  
Order No.
2576060000  
Type
DRMKITP230VAC 4CO LD/PB  
GTIN (EAN)
4050118585810  
Qty.
10  items

Dimensions and weights

Depth
82,3  mm
Depth (inches)
3,24  inch
Height
101,8  mm
Height (inches)
4,008  inch
Width
30,6  mm
Width (inches)
1,205  inch
Net weight
108,302  g

Temperatures

Storage temperature
-40 °C...70 °C  
Ambient temperature
-40 °C…55 °C  
Humidity
35...85 % rel. humidity, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

Control side

Rated control voltage
230 V AC  
Rated current AC
6.1 mA (50 Hz)  
5.2 mA (60 Hz)  
Power rating
1.0...1.2VA (60HZ)  
Coil resistance
15000 Ω ± 10 %  
Status indicator
red LED  

Load side

Rated switching voltage
250 V AC  
Continuous current
5 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Min. switching power
10 mA @ 12 V  
100 mA @ 5 V  
Inrush current
10 A / 50 ms  
AC switching capacity (resistive), max.
1250 VA  
DC switching capacity (resistive), max.
120 W @ 24 V  
Switch-on delay
<20 ms  
Switch-off delay
<20 ms  
Contact type
4 CO contact (AgNi flash gold-plated)  
Mechanical service life
20 x 106 switching cycles  

General data

Mounting rail
TS 35  
Test button available
Yes  
Version of test button
Lockable test button  
Momentary test button  
Mechanical switch position indicator
Yes  
Colour
black  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250  V
Pollution severity
2  
Surge voltage category
III  
Insulating material group
C  
Clearance and creepage distances for control side - load side
≥ 3 mm  
Dielectric strength for control side - load side
1.8 kVeff /1 min.  
Dielectric strength of neighbouring contacts
1 kVeff / 1 min  
Dielectric strength of open contact
1 kVeff / 1 min  
Protection degree
IP20  

Further details of approvals / standards

Certificate no. (cURus) relay
E312083  
Certificate no. (cURus) base
E355547  

Connection data

Wire connection method
PUSH IN  
Stripping length, rated connection
10  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,14  mm²
Clamping range, max.
1,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 16  
Wire cross-section, solid, min.
0,14  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire connection cross section, finely stranded, min.
0,14  mm²
Wire connection cross section, finely stranded, max.
1,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5  mm²
Blade size
0.4 x 2.5 mm  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01