S2L 3.50/42/180G 3.5SN BK BX
Product image
S2L 3.50/42/180G 3.5SN BK BX
Product image
S2L 3.50/42/180G 3.5SN BK BX
Dimensional drawing

S2L 3.50/42/180G 3.5SN BK BX

PCB plug-in connector, male header, closed side, THT solder connection, 3.50 mm, Number of poles: 42, 180°, Solder pin length (l): 3.5 mm, tinned, black, Box

商品番号 2559290000
データシートのダウンロード エンジニアリング・サポート 製品ダウンロード
付属品 3 関連製品 36
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Material data Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, male header, closed side, THT solder connection, 3.50 mm, Number of poles: 42, 180°, Solder pin length (l): 3.5 mm, tinned, black, Box 
Order No.
2559290000 
Type
S2L 3.50/42/180G 3.5SN BK BX 
GTIN (EAN)
4050118669206 
Qty.
18 items
Product data
IEC: 250 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 

Dimensions and weights

Depth
10,5 mm
Depth (inches)
0,413 inch
Height
17,7 mm
Height (inches)
0,697 inch
Height of lowest version
14,2 mm
Width
74,9 mm
Width (inches)
2,949 inch
Net weight
10,929 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System specifications

Product family
OMNIMATE Signal - series B2L/S2L 3.50 - 2-row 
Type of connection
Board connection 
Mounting onto the PCB
THT solder connection 
Pitch in mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
Outgoing elbow
180° 
Number of poles
42 
Number of solder pins per pole
1 
Solder pin length (l)
3,5 mm
Solder pin dimensions
d = 1.0 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
L1 in mm
70 mm
L1 (インチ)
2,758 "
行数
1 
ピンモデルシリーズ数量
2 
DIN VDE 57 106に適合したタッチセーフ保護
フィンガーセーフプラグ抜き/バックオブハンドセーフのプラグ差込 
DIN VDE 0470に適合したタッチセーフ保護
IP20接続/IP10接続解除 
コーディング可能
はい 
差し込み力 / 極、最大.
5 N
引張強度/極、最大.
4 N

Material data

Insulating material
PBT 
Colour
black 
Colour chart (similar)
RAL 9011 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
保管温度、最小
-40 °C
保管温度、最大
70 °C
動作温度、最小
-50 °C
動作温度、最大
100 °C
温度範囲、設置、最小
-30 °C
温度範囲、設置、最大
100 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
10 A
Rated current, max. number of poles (Tu=20°C)
10 A
Rated current, min. number of poles (Tu=40°C)
9 A
Rated current, max. number of poles (Tu=40°C)
8,5 A
Rated voltage for surge voltage class / pollution degree II/2
250 V
Rated voltage for surge voltage class / pollution degree III/2
125 V
Rated voltage for surge voltage class / pollution degree III/3
80 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 77 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
150 V
Rated current (Use group B / CSA)
5 A

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
150 V
Rated current (Use group B / UL 1059)
10 A

Packing

Packaging
Box 
VPE length
338 mm
VPE width
130 mm
VPE height
27 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01