ACT20M-RTCI-CO-OLP-P
Product image
ACT20M-RTCI-CO-OLP-P
Connection diagram
ACT20M-RTCI-CO-OLP-P
Dimensioned drawing
ACT20M-RTCI-CO-OLP-P
ACT20M-RTCI-CO-OLP-P

ACT20M-RTCI-CO-OLP-P

Product not yet available, preliminary product data.

Dette produkt er endnu ikke tilgængeligt.

Passive isolator, With galvanic isolation, Input : Temperature, PT100, thermocouple, Output : 4-20 mA

Produkt ID 2825250000
Download datablad Engineering-support Produktdownloads
Tilbehør 1 Anvendte produkter 6
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Connection data EMC conformity and approvals Part description Classifications

General ordering data

Version
Passive isolator, With galvanic isolation, Input : Temperature, PT100, thermocouple, Output : 4-20 mA 
Order No.
2825250000 
Type
ACT20M-RTCI-CO-OLP-P 
GTIN (EAN)
4064675361060 
Qty.
1 Styk

Dimensions and weights

Depth
114,3 mm
Depth (inches)
4,5 inch
Height
112,5 mm
Height (inches)
4,429 inch
Width
6,1 mm
Width (inches)
0,24 inch
Net weight
0 g

Temperatures

Storage temperature
-40 °C...85 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Influence of the sensor cable resistance
<0.002 Ω/Ω 
Line resistance in measuring circuit
50 Ω@ RTD (Pt100) 
10 kΩ @ TC (J, K) 
Number inputs
1 
Sensor
PT100 (2-/3-/4- wire) 
Thermocouples: J, K 
Temperature input range
Configurable 
PT100: -200…+850 °C 
min. measurement range 10°C (RTD) 
J: (-100…+1200 °C) 
K: (-180…+1372 °C) 
min. measurement range 50°C (TC) 

Output

Load impedance current
≤ 600 Ω 
Number of outputs
1 
Output current
configurable 
4...20 mA 
20…4 mA 
Supply voltage (output)
16,8 V…31,2 V 
Type
passive 
connected control must be active 
Wire break detection
Configurable 
3.5 mA / 23 mA / none 

General data

IP20 
Accuracy
absolute accuracy: <±0.05 % of the measurement range 
RTD (PT100) Basic accuracy: <±0.1 °C of the measurement range 
TC (J,K) Basic accuracy: <±0.5 °C of the measurement range 
Cold-junction compensation error
±(2.0 °C + 0.4 °C x Δt) Δt = inside temperature – ambient temperature 
Configuration
DIP switch 
Mounting rail
TS 35 
Nominal power consumption
0,5 VA
Operating altitude
≤ 2000 m 
Power consumption, max.
0,8 W
Power consumption, typ.
0,5 W
Step response time
Configurable 
≤ 30 ms 
<300 ms 
Supply voltage
Output loop powered 
6…35 V 
Temperature coefficient
RTD (PT100) ≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C 
TC (J,K) 0.1 °C ⁄ °C 

Insulation coordination

EMC standards
IEC 61326-1 
Galvanic isolation
2-way isolator 
Insulation voltage
2.5 kVeff /1 min. 
Pollution severity
2 
Rated voltage
300 Veff 
Surge voltage category
II 

Connection data

Type of connection
PUSH IN 
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

EMC conformity and approvals

EMC standards
IEC 61326-1 

Part description

Product description
The ACT20M-RTCI-CO-OLP-S passive configurable temperature transducer isolates and converts analogue signals. An analogue RTD (Type Pt100) or TC (Type J, K) input signal is linearly converted into an analogue output signal and galvanically isolated. Power is supplied through the output measurement circuit (output- loop powered). 

Classifications

ETIM 8.0
EC002919 
ETIM 9.0
EC002919 
ETIM 10.0
EC002919 
ECLASS 14.0
27-21-01-29 
ECLASS 15.0
27-21-01-29