LP 5.08/02/135 3.2SN OR BX
제품 이미지
그림과 유사
LP 5.08/02/135 3.2SN OR BX
Dimensional drawing
LP 5.08/02/135 3.2SN OR BX
Graph

LP 5.08/02/135 3.2SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 2, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box

ID výrobku 1595730000
Stáhnout datový list Инженерная поддержка Загрузка продуктов
Aksesuarlar 3 İlgili ürünler 10
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 2, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box 
Order No.
1595730000 
Type
LP 5.08/02/135 3.2SN OR BX 
GTIN (EAN)
4008190190255 
Ilość
100 items
Product data
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
17,5 mm
Byggdjup (tum)
0,689 inch
Height
20 mm
Height (inches)
0,787 inch
Height of lowest version
16,8 mm
Width
10,76 mm
Width (inches)
0,424 inch
Net weight
2,816 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LP 
Wire connection method
Clamping yoke connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
135° 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Number of poles
2 
Pin series quantity
1 
Fitted by customer
Yes 
Number of rows
1 
Max. adjacent poles per row
24 
Solder pin length (l)
3,2 mm
Solder pin dimensions
0.75 x 0.9 mm 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
1 
Screwdriver blade
0.6 x 3.5 
Punta de destornillador normativa
DIN 5264 
Meghúzási nyomaték, min.
0,5 Nm
Moment obrotowy dociągający, maks.
0,6 Nm
Clamping screw
M 3 
Stripping length
6 mm
L1 v mm
5,08 mm
L1 v palcích
0,2 "
Berührungsschutz nach DIN VDE 0470
IP 20 
Protección contra contacto según DIN VDE 57106
Safe from finger touch 
Védelmi osztály
IP20 
Rezystancja skrośna
1,20 mΩ 

Material data

Изоляционный материал
PA 
Barwny
orange 
Carta de colores (similar)
RAL 2000 
grupa materiałów izolacyjnych
I 
Porównywalny wskaźnik śledzenia (CTI)
≥ 600 
UL 94 flammability rating
V-2 
Kontaktmaterial
Cu-alloy 
Érintkező felület
tinned 
Coating
1-3 μm Ni 
4-6 μm SN 
Typ cynowania
matt 
Layer structure of solder connection
4...6 µm Ni / 4...6 µm Sn 
Temperatura magazynowania, min.
-40 °C
Lagertemperatur, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Teplotní rozsah, instalace, min.
-25 °C
Teplotní rozsah, instalace, max.
100 °C

Conductors suitable for connection

Anslutningsområde, min.
0,13 mm²
Clamping range, max.
6 mm²
przekrój przyłącza przewodu AWG, min.
AWG 26 
Sezione di collegamento cavo AWG, max.
AWG 12 
jednodrutowe, min. H05(07) V-U
0,5 mm²
jednodrutowe, maks. H05(07) V-U
6 mm²
cienkodrutowe, min. H05(07) V-K
0,5 mm²
cienkodrutowe, maks. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
z AEH z kołnierzem DIN 46 228/4, maks.
2,5 mm²
z tulejką zaciskową, DIN 46228 pt 1, min.
0,5 mm²
med ändhylsa enligt DIN 46 228/1, max.
2,5 mm²
Нутрометр в соответствии с EN 60999 a x b; ø
2.8 mm x 2.4 mm; 3.0 mm 
Raccordement
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Prąd znamionowy, min. liczba biegunów (Tu=20°C)
32 A
Prąd znamionowy, maks. liczba biegunów (Tu=20°C)
30,5 A
Märkström, min. antal poler (Tu=40°C)
32 A
Prąd znamionowy, maks. liczba biegunów (Tu=40°C)
25 A
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia II/2
500 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/2
250 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/3
250 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
4 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/2
4 kV
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
4 kV
Tenue aux courants de faible durée
3 x 1s with 120 A 

Rated data acc. to CSA

Institute (CSA)
CSA 
Certificate No. (CSA)
200039-1202191 
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
20 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 
Odkaz na hodnoty pro schválení
Specifikace jsou maximální hodnoty, podrobnosti viz příslušná certifikace. 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
20 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 

Packing

Packaging
Box 
VPE length
117 mm
VPE width
103 mm
VPE height
65 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • It is necessary to hold the insulating body of the one or two pole terminal when tightening the screw
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01