ST 4000/L M12 F

ST 4000/L M12 F

Tämä tuote ei ole pian enää saatavana.

Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 240 mm², Screw connection, Direct mounting

Tuotteen tunnus 1809180000
Lataa tietosivu Suunnittelutuki Viestintävälineet Tuotelataukset
Lisävarusteet 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Material data System specifications Additional technical data Conductors for clamping (rated connection) General Rating data Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 240 mm², Screw connection, Direct mounting 
Order No.
1809180000 
Type
ST 4000/L M12 F 
GTIN (EAN)
4032248293506 
Qty.
15 items
Delivery status
This article will no longer be available in the future. 

Dimensions and weights

Height
180 mm
Height (inches)
7,087 inch
Width
55 mm
Width (inches)
2,165 inch
Net weight
691,667 g

Temperatures

Storage temperature
-25 °C...55 °C 
Ambient temperature
-60 °C…85 °C 
Continuous operating temperature, min.
−50 °C
Continuous operating temperature, max.
130 °C

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Material data

Basic material
Glass fibre reinforced epoxy resin 
Colour
red 
UL 94 flammability rating
V-0 

System specifications

Number of potentials
1 
Number of levels
1 
Number of clamping points per level
2 
Levels cross-connected internally
No 
PE connection
No 
Mounting rail
Mounting plate 

Additional technical data

Explosion-tested version
No 
Installation advice
Direct mounting 
Type of mounting
when screwed in 

Conductors for clamping (rated connection)

Cable lug to DIN 46234
10...240 mm² 
Cable lug to DIN 46235
25...240 mm² 
Clamping range, bolted connection , max.
240 mm²
Clamping range, bolted connection , min.
16 mm²
Conductor cross-section (rated connection), max.
240 mm²
Conductor cross-section (rated connection), min.
16 mm²
Connection cross-section, stranded, min.
16 mm²
Connection direction
on side 
Number of connections
2 
Stud size for spade connection
M 12 
Tightening torque, max.
62 Nm
Tightening torque, min.
60 Nm
Type of connection
Screw connection 
Wire connection cross section AWG, max.
kcmil 500 
Wire connection cross section AWG, min.
AWG 4 
Wire connection cross section, finely stranded, min.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
16 mm²
Wire connection cross-section, finely stranded, max.
240 mm²
Wire connection cross-section, solid core, min.
16 mm²

General

Installation advice
Direct mounting 
Mounting rail
Mounting plate 
Wire connection cross section AWG, max.
kcmil 500 
Wire connection cross section AWG, min.
AWG 4 

Rating data

Rated cross-section
240 mm²
Rated voltage
4 000 V
Voltage with epoxy resin partition plate
4 000 V
Nominal current
560 A
Current at maximum wires
560 A
Contact resistance
0,08 mΩ
Rated impulse withstand voltage
30 kV 
Impulse voltage with epoxy resin partition plate
30 kV
Power loss (IEC 60947-7-x)
13,28 W
Pollution severity
3 

Classifications

ETIM 8.0
EC000897 
ETIM 9.0
EC000897 
ETIM 10.0
EC000897 
ECLASS 14.0
27-25-01-01 
ECLASS 15.0
27-25-01-01