Egenskaber
| Version | ACT20P, Analogue isolating amplifier |
| Order No. | 3027140000 |
| Type | ACT20P-RS232-RS485/422-S |
| GTIN (EAN) | 4099986959545 |
| Qty. | 1 Styk |
| Depth | 114,2 mm |
| Depth (inches) | 4,496 inch |
| Height | 117,2 mm |
| Height (inches) | 4,614 inch |
| Width | 22,5 mm |
| Width (inches) | 0,886 inch |
| Net weight | 153 g |
| Storage temperature | -40 °C...80 °C |
| Operating temperature | -20 °C...70 °C |
| Humidity | 5...95 %, no condensation |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC |
Lead 7439-92-1
6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol 119-47-1 |
| SCIP | 2f6dd957-421a-46db-a0c2-cf1609156924 |
| Assignment | DTE/DCE switchable with DIP switch |
| Bit delay | ≤ 3 µs |
| Bit distortion | <5 % |
| Communication | Bi-directional |
| Connection type | SUB-D9 (plug, M3) |
| Control of data direction | Automatic or via RS232 RTS/CTS |
| Interface | 1 x serial RS-232/RS-485/RS-422 |
| Transmission rate |
9.600 bps
19.2 kBit/s 115.2 kBit/s 8 bit or 8 bit + parity bit |
| Galvanic isolation | 3-way isolator |
| Nominal power consumption | 1,2 VA |
| Power consumption | ≤ 1.5 W |
| Protection degree | IP20 |
| Voltage supply | 24 V DC ± 20 % |
| Galvanic isolation | 3-way isolator |
| Insulation voltage input or output/supply | 2 kV DC / 1 min. |
| Pollution severity | 2 |
| Surge voltage category | II |
| Type of connection | Screw connection |
| Stripping length, rated connection | 8 mm |
| Tightening torque, min. | 0,4 Nm |
| Tightening torque, max. | 0,6 Nm |
| Wire connection cross section, finely stranded, min. | 0,2 mm² |
| Wire connection cross section, finely stranded, max. | 2 mm² |
| Wire cross-section, finely stranded, min. (AWG) | AWG 24 |
| Wire cross-section, finely stranded, max. (AWG) | AWG 14 |
| Product information | The interface converter is intended for use in RS232/RS485/422 systems in an industrial environment. Depending on the use case, different functions can be realised with the device, see section “Applications”. |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_323471) |
| Catalogues | [Catalogues in PDF-format](https://www.weidmueller.com/int/service/technical_product_catalogues.jsp) |
| ETIM 6.0 | EC000310 |
| ETIM 7.0 | EC000310 |
| ETIM 8.0 | EC000310 |
| ETIM 9.0 | EC000310 |
| ECLASS 9.0 | 19-17-92-90 |
| ECLASS 9.1 | 27-21-01-90 |
| ECLASS 10.0 | 19-17-92-90 |
| ECLASS 11.0 | 19-17-90-90 |
| ECLASS 12.0 | 27-06-03-20 |
| ECLASS 13.0 | 27-06-03-20 |
| ECLASS 14.0 | 27-06-03-20 |
Tilbehør
-
Produkt ID:1082540000Pakningsenhed:200 Styk
ESG, Device markers x 20 mm, PA 66, Colour: white
-
Produkt ID:1912130000Pakningsenhed:5 Styk
ESG, Device markers x 13.5 mm, PA 66, Colour: Transparent
MarkersDevice markersMultiCardESGESG 6.6/... BHZBlank
MarkersDevice markersMultiCardESGESG 8/13.5/43.3 SAI AUBlank
Enkeltdele
-
Produkt ID:1069350000Pakningsenhed:78 Styk
PCB plug-in connector Black release lever cod. 02
Electronics HousingsModular electronics housingsConnection system - CH20MPCB connectors four pole - CH20M22, CH20M45, CH20M67Female plugs - Clamping yoke screw connection