WAZ5 VVC 0-10V/0-10V
WAZ5 VVC 0-10V/0-10V
Electric symbol
WAZ5 VVC 0-10V/0-10V

WAZ5 VVC 0-10V/0-10V

Signal converter/insulator, Input : 0-10 V, Output : 0-10 V

Product ID 8540340000
Gegevensblad downloaden Product Downloads Engineering Support
Toebehoren 1 Verwante producten 10
General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output Output (digital) General data Insulation coordination Connection data Important note Classifications Tender specification sheets Approvals

General ordering data

Version
Signal converter/insulator, Input : 0-10 V, Output : 0-10 V  
Order No.
8540340000  
Type
WAZ5 VVC 0-10V/0-10V  
GTIN (EAN)
4032248180721  
Qty.
1  items
Delivery status
This article will no longer be available in the future.  
Available until
30.12.2023  
Alternative product
[2456860000](~/p/2456860000)  

Dimensions and weights

Depth
112,4  mm
Depth (inches)
4,425  inch
Width
17,5  mm
Width (inches)
0,689  inch
Length
92,4  mm
Length (inches)
3,638  inch
Net weight
124  g

Temperatures

Storage temperature
-20 °C...85 °C  
Operating temperature
0 °C...70 °C  
Humidity at operating temperature
0...95 % (no condensation)  

Probability of failure

SIL in compliance with IEC 61508
None  
MTTF
463  a

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
6c, 7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
94561991-a963-4084-a5f3-dfa3a5c2a27e  

Input

Input resistance, voltage
typ. 100 kΩ  
Input voltage
0...10 V  
Number of inputs
1  

Output

Cut-off frequency (-3 dB)
10 Hz  
Load impedance current
≤ 600 Ω  
load impedance voltage
≥ 1 kΩ  
Number of outputs
1  
Output voltage, note
0...10 V  

Output (digital)

Max. switching voltage, AC
0  V
Rated switching current
0.1 A  

General data

Accuracy
0.2 %  
Configuration
none  
Galvanic isolation
3-way isolator  
Nominal power consumption
1,5  VA
Power consumption
<1.3 W @ IOUT = 5 mA  
Protection degree
IP20  
Rail
TS 35  
Step response time
≤ 45 ms  
Temperature coefficient
± 250 ppm/K  
Voltage supply
24 V DC ± 25 %  

Insulation coordination

EMC standards
EN 55011  
EN 61000-6  
Galvanic isolation
3-way isolator  
Impulse withstand voltage
4 kV  
Insulation voltage
2 kVeff / 5 s  
Insulation voltage input or output/rail
4 kVeff / 1 min.  
Insulation voltage input or output/supply
2 kVeff / 5 s  
Pollution severity
2  
Rated voltage
300 V  
Surge voltage category
III  

Connection data

Type of connection
Tension-clamp connection  
Stripping length, rated connection
7  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
2,5  mm²

Important note

Product information
This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.  

Classifications

ETIM 6.0
EC002653  
ETIM 7.0
EC002653  
ETIM 8.0
EC002653  
ETIM 9.0
EC002653  
ETIM 10.0
EC002653  
ECLASS 9.0
27-21-01-20  
ECLASS 9.1
27-21-01-20  
ECLASS 10.0
27-21-01-20  
ECLASS 11.0
27-21-01-20  
ECLASS 12.0
27-21-01-20  
ECLASS 13.0
27-21-01-20  
ECLASS 14.0
27-21-01-20  
ECLASS 15.0
27-21-01-20  

Tender specification sheets

Long specification

Standard signal isolating converter
1-channel signal isolating converter in 17.5 mm width, with external power supply,
to transmit and isolate analogue DC current signals from 0 to 10 V

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm
Tension-clamp connection / Nominal cross-section 1.5 mm2
Protection degree: IP 20  

Input                         0...10 V
Output                                             0...10 V
Transmission error             < 0,2% v. E. 
Limit frequency 10 Hz
Auxiliary power                                     24 VDC +/- 25 %
Power loss approx. 1.3 W
Ambient
temperature range 0 °C...+55 °C

Secure isolation                   EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other
Test voltage                               4 kV input against output against auxiliary power
Rated
voltage                                         300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus










Type                                                             WAZ5 VVC 0-10/0-10V

 
Short specification
Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width, with external power supply, for transmitting and isolating analogue DC current signals from 0 to 10 V  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E141197