ACT20P-CI-CO-S
Similar to illustration
ACT20P-CI-CO-S
Connection diagram
ACT20P-CI-CO-S
Dimensioned drawing
ACT20P-CI-CO-S
Similar to illustration

ACT20P-CI-CO-S

Аналоговый разделительный усилитель, Вход : 0(4)-20 mA, Выход : 0(4)-20 mA, Преобразователь сигнала с гальванической развязкой, HART®

Tuotteen tunnus 7760054114
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 2 Yksittäiset osat 1 Samankaltaiset tuotteet 15
Dopuszczenia Основные данные для заказа Wymiary i masa Температуры Sannolikhet för bortfall Zgodność produktu z wymogami środowiska naturalnego Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data Part description Classifications

Dopuszczenia

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/0d1637a4-c7dd-4915-8bc8-4c9de8d8b393/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/4a92d911-d582-40e3-85fc-c9e9b159e140/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/2fb608f0-c73d-4515-a7a5-878046a505f4/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/52b59257-358c-4bc4-9ea4-df407cebf157/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E469563 
Certificate no. (cULusEX)
E338066 

Основные данные для заказа

Version
Аналоговый разделительный усилитель, Вход : 0(4)-20 mA, Выход : 0(4)-20 mA, Преобразователь сигнала с гальванической развязкой, HART® 
Order No.
7760054114 
Type
ACT20P-CI-CO-S 
GTIN (EAN)
6944169656552 
Qty.
1 items

Wymiary i masa

Depth
113,7 mm
Глубина (дюймов)
4,476 inch
Height
117,2 mm
Height (inches)
4,614 inch
Width
12,5 mm
Width (inches)
0,492 inch
Net weight
142 g

Температуры

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

Sannolikhet för bortfall

SIL in compliance with IEC 61508
None 

Zgodność produktu z wymogami środowiska naturalnego

RoHS Compliance Status
Соответствует с исключением 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Caída de tensión
≤ 1 V 
Input current
0...20 mA 
4…20mA 
Input signal
current source 
HART® signal bidirectional 
Počet vstupů
1 
Sensor
2-wire transmitter (without own power supply) 
3-wire sensor 
4- wire sensor (with own power supply) 
Sensor supply
> 17 V DC at 20 mA 

Output

Load impedance current
≤ 550 Ω 
Number of outputs
1 
Output current
0…20 mA (if input: 0…20 mA) 
4…20 mA (if input: 4…20 mA) 
HART® digital signal 
Type
aktivní 
připojené řízení musí být pasivní 

General data

Configuration
none 
Current consumption
≤60 mA (24V power supply, 20mA output) 
Matningsspänning
20…30 V DC 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Power consumption
ca. 1.5 W 
Skyddsklass
IP20 
Step response time
≤ 0,5 ms 
Temperature coefficient
80 ppm/K 
Type of signal forwarding according to HART®
unchanged 
Точность
< 0,1 % del valor final 

Insulation coordination

Classe di sovratensione
III 
Insulation voltage
2 kV inputs / outputs / power supply 
Normes CEM
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Sobretensión de choque fijo
4 kV (1.2/50 µs) 
Vizsgálati feszültség
0,3 kV
Расчетное напряжение
300 V 
갈바닉 절연
Triple isolateur 
entre entrée ⁄ sortie ⁄ alimentation 
오염 심각도
2 

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T5 Gc 
Marking
II 3 G Ex ec IIC T5 Gc 

Connection data

Type of connection
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 

Part description

Product description
The non-adjustable DC isolating amplifier ACT20P-CI-CO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation).

Properties
  • HART-compatible for 0.5 - 2.5 kHz
  • The active or passive mA signal inputs are fully galvanically isolated.
  • Operating status display on a front panel LED
  • Galvanic 3-way isolation between input, output and supply.
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20