BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product image
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product image
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Dimensional drawing
Similar to illustration
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Graph
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Graph
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product benefits
one connector for: Power, Signal (data) and Shielding
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180
Product benefits
Single-handed operation
Automatic latching

BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180

Złącze wtykowe do druku, wtyk żeński, 7.62 mm, Liczba biegunów: 4, 180°, PUSH IN z aktuatorem, Zakres zaciskania, maks. : 6 mm², skrzynia

Ürün No. 2681770000
Veri sayfasını indir Mühendislik desteği Ürün İndirmleri
Aksesuarlar 5 Karşı parçalar 3 İlgili ürünler 1
Approvals Ogólne dane zamówieniowe Dimensions and weights Zgodność produktu z wymogami środowiska naturalnego Parametry systemu Dane materiałowe Przewody pasujące do złącza Rated data acc. to IEC Rated data acc. to UL 1059 Opakowanie Dane techniczne Conductors that can be connected - Hybrid Важное примечание Classifications

Approvals

ROHS
Conform 

Ogólne dane zamówieniowe

버전
Złącze wtykowe do druku, wtyk żeński, 7.62 mm, Liczba biegunów: 4, 180°, PUSH IN z aktuatorem, Zakres zaciskania, maks. : 6 mm², skrzynia 
주문 번호
2681770000 
유형
BVFL 7.62HP/4/180MSF4 BCF/4 SNBKBX SH180 
GTIN(EAN)
4050118691429 
수량
20 adet
제품 데이터
IEC: 800 V / 38 A / 0.5 - 6 mm²
UL: / AWG 24 - AWG 8 
Packaging
Box 

Dimensions and weights

순중량
48,38 g

Zgodność produktu z wymogami środowiska naturalnego

RoHS 준수 상태
Zgodne, bez wyłączenia 
REACH SVHC
No SVHC above 0.1 wt% 

Parametry systemu

Familia del producto
OMNIMATE Power - seria BV/SV 7.62HP 
Tipo de conexión
Полевое соединение 
와이어 결선 방식
PUSH IN with actuator 
피치(mm)(P)
7,62 mm
피치(인치)(P)
0,3 "
도체 아웃렛 방향
180° 
Number of poles
4 
L1 in mm
30,48 mm
L1(인치)
1,2 "
L2, mm
3,81 mm
L2 in inch
0,15 "
행 수
1 
핀 시리즈 수량
1 
정격 단면적
6 mm²
DIN VDE 57 106에 따른 터치 안전 보호
Safe from finger touch 
DIN VDE 0470에 따른 터치 안전 보호
IP 20 
Resistencia de paso
4.50 mΩ 
Codificable
Yes 
Stripping length
12 mm
스크루 플랜지용 조임 토크, 최소
0,2 Nm
스크루 플랜지용 조임 토크, 최대
0,3 Nm
Screwdriver blade
0.6 x 3.5 
Plugging cycles
25 

Dane materiałowe

절연재
PA GF 
컬러 코드
svart 
작동 요소의 색상
white 
컬러 차트(유사)
RAL 9011 
절연재 그룹
II 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 500 
UL 94 flammability rating
V-0 
접점 재질
Cu-alloy 
접점 표면
tinned 
플러그 접점의 레이어 구조
6...8 µm Sn glossy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
125 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
125 °C

Przewody pasujące do złącza

클램프 범위, 최소
0,5 mm²
클램프 범위, 최대
6 mm²
단선, 최소 H05(07) V-U
0,5 mm²
단선, 최대 H05(07) V-U
6 mm²
연선, 최소 H05(07) V-K
0,5 mm²
연선, 최대 H05(07) V-K
6 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0,5 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
6 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0,5 mm²
페럴 포함, DIN 46228 pt 1, 최대
6 mm²
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      1076980000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9025930000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9019140000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9004060000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9025910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019170000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0186100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0244100000
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      0533500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0191900000
참조 텍스트
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
38 A
정격 전류, 최대 극 수(Tu=20°C)
38 A
정격 전류, 극 수(Tu=40°C)
34 A
정격 전류, 최대 극 수(Tu=40°C)
34 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
800 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
630 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
630 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
6 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
6 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
6 kV
단시간 내전류 저항
3 x 1s with 420 A 
연면거리, 분
12,7 mm
최소간격, 분
10,4 mm

Rated data acc. to UL 1059

Rated voltage (Use group F / UL 1059)
600 V
Rated current (Use group F / UL 1059)
33 A
Sección de conexión del conductor AWG, mín.
AWG 24 
Sección de conexión del conductor AWG, máx.
AWG 8 

Opakowanie

패키징
skrzynia 
VPE 길이
354 mm
VPE 폭
140 mm
VPE magasság
63 mm

Dane techniczne

Шаг в мм (сигнал)
3.81 mm 
Pitch in inches (Signal)
0.15 inch 
Number of poles (Signal)
4 
L2, mm
3,81 mm
L2(인치)
0,15 "
열 수 (신호)
2 
Materiale dei contatti (Segnale)
CuMg 
접촉면 (신호)
tinned 
Layer structure of the plug contact (Signal)
1-3 µ Ni / 4-8 µ Sn 
Rated voltage for overvoltage class/pollution severity level II/2 (Signal)
250 V 
Rated voltage for overvoltage class/pollution severity level III/2 (Signal)
150 V 
Rated voltage for overvoltage class/pollution severity level III/3 (Signal)
63 V 
Rated impulse voltage for overvoltage class/pollution severity level II/2 (Signal)
2.5 kV 
Rated impulse voltage for overvoltage class/pollution severity level III/2 (Signal)
2.5 kV 
Rated impulse voltage for overvoltage class/pollution severity level III/3 (Signal)
2.5 kV 
Short-time withstand current resistance (Signal)
3 x 1s with 80 A 
Connector cross-section (Signal)
AWG 26...AWG 16 

Conductors that can be connected - Hybrid

Clamping range, rated connection (Power)
0.5...10 mm² 
Clamping range, rated connection (Signal)
0.2...1.5 mm² 
Connector cross-section (Power)
AWG 24...AWG 8 
Connector cross-section AWG (Signal)
AWG 26...AWG 16 
solid, H05(07) V-U (Power)
0.5...10 mm² 
solid, H05(07) V-U (Signal)
0.14...1.5 mm² 
flexible, H05(07) V-K (Power)
0.5...6 mm² 
flessibile, H05(07) V-K (Segnale)
0.14...1.5 mm² 
with wire-end ferrule with collar (Power)
0.5...6 mm² 
DIN 46 228/4 규격 슬리브 포함 와이어 종단 채용 (신호)
0.25...1.5 mm² 
with wire-end ferrule according to DIN 46 228/1 (Power)
0.5...6 mm² 
con terminal tubular según DIN 46 228/1 (Señal)
0.25...1.5 mm² 

Важное примечание

IPC 준수
Заявление о соответствии: все изделия разрабатываются, производятся и поставляются в соответствии с установленными международными стандартами и нормами и соответствуют характеристикам, указанным в технической документации, а также обладают декоративными свойствами в соответствии с IPC-A-610, "Класс 2". Любые другие запросы информации об изделиях могут быть рассмотрены по запросу. 
참고 사항
  • Technical specifications refer to the power contacts
  • Technical data of signal contacts: 50V / 5A, stripping length 8mm
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Additional pole combinations on request
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-03-02 
ECLASS 15.0
27-46-03-02