LM 3.50/02/135 3.2SN OR BX
Produktillustration
LM 3.50/02/135 3.2SN OR BX
Produktillustration
LM 3.50/02/135 3.2SN OR BX
Dimensional drawing
LM 3.50/02/135 3.2SN OR BX
Graph

LM 3.50/02/135 3.2SN OR BX

Printed circuit board terminals, 3.50 mm, Number of poles: 2, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box

Produkt ID 1714980000
Download datablad Engineering Support Product Downloads
Anvendte produkter 11
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Zulassungen
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319226/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319262/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Zertifikat-Nr. (UR)
E60693 

General ordering data

Ausfuehrung
Printed circuit board terminals, 3.50 mm, Number of poles: 2, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.08 mm², Box 
Best.-Nr.
1714980000 
Art
LM 3.50/02/135 3.2SN OR BX 
GTIN (EAN)
4008190337315 
VPE
246 Styk
Product data
IEC: 320 V / 16 A / 0.5 - 1.5 mm²
UL: 300 V / 10 A / AWG 28 - AWG 14 
Packaging
Box 

Dimensions and weights

Tiefe
12.7 
깊이 (인치)
0,5 inch
Höhe
15,9 mm
Height (inches)
0,626 inch
Height of lowest version
12,7 mm
Breite
7,6 mm
Width (inches)
0,299 inch
Nettogewicht
1,228 g

Environmental Product Compliance

RoHS-Konformitätsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Produktfamilj
OMNIMATE Signal - series LM 
Ledaranslutningsteknik
Clamping yoke connection 
Montering på kretskortet
THT solder connection 
Ledarutgångsriktning
135° 
Raster in mm (P)
3,5 mm
Delning i tum (P)
0,138 "
Number of poles
2 
핀 시리즈 수량
1 
Vybavuje zákazník
Yes 
Number of rows
1 
Max. sousedních kolíků na řadu
24 
Pájecí kolík, délka (l)
3,2 mm
Lötstift-Abmessungen
1.0 x 0.6 mm 
Průměr otvoru pájecího očka (D)
1,3 mm
Tolérance du diamètre du trou d'implantation (D)
+ 0,1 mm 
Number of solder pins per pole
1 
Screwdriver blade
0.4 x 2.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,2 Nm
Tightening torque, max.
0,25 Nm
Clamping screw
M 2 
Stripping length
5 mm
L1 in mm
3,5 mm
L1 in inches
0,138 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
3.60 mΩ 
Insulation resistance
≥ 108 Ω 

Material data

Materiales aislantes
PA 
Color
orange 
Colour chart (similar)
RAL 2000 
Grupo de materiales aislantes
I 
Kriechstromfestigkeit (CTI)
≥ 600 
Isolationswiderstand
≥ 108 Ω 
UL 94 가연성 등급
V-2 
Contact material
Cu-alloy 
Contact surface
tinned 
Traitement
1-3 μm Ni 
4-6 μm SN 
Tipo de estañado
matt 
Schichtaufbau - Lötanschluss
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
100 
Temperature range, installation, min.
−25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Klemmbereich, min.
0,08 mm²
2,08 mm²
Leiteranschlussquerschnitt AWG, min.
AWG 28 
Leiteranschlussquerschnitt AWG, max.
AWG 14 
eindrähtig, min. H05(07) V-U
0,5 mm²
eindrähtig, max. H05(07) V-U
1,5 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
1,5 mm²
mit AEH mit Kragen DIN 46 228/4, min.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
0,75 mm²
Calibre macho de conformidad con la norma EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Corriente nominal, número de polos mín. (Tu=20 °C)
16 A
Corriente nominal, número de polos máx. (Tu=20 °C)
12 A
Bemessungsstrom, min. Polzahl (Tu=40°C)
14 A
Rated current, max. number of poles (Tu=40°C)
10 A
Rated voltage for surge voltage class / pollution degree II/2
320 V
Rated voltage for surge voltage class / pollution degree III/2
160 V
Rated voltage for surge voltage class / pollution degree III/3
160 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 72 A 

Rated data acc. to CSA

Institut (CSA)
CSA 
Certifikat nr. (CSA)
154685-1202192 
Märkspänning (användargrupp B / CSA)
300 V
Nennspannung (Use group D / CSA)
300 V
Jmenovitý proud (aplikační skupina B / CSA)
10 A
Jmenovitý proud (aplikační skupina D / CSA)
10 A
Ledardiameter AWG, min.
AWG 28 
Průřez vodiče AWG, max.
AWG 14 
Hänvisning till godkännandevärden
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Institut (UR)
UR 
Certifikat nr. (UR)
E60693 
Märkspänning (användargrupp B / UL 1059)
300 V
정격 전압(사용 그룹 D / UL 1059)
300 V
Nennstrom (Use group B / UL 1059)
10 A
Corrente nominale (Gruppo D / UL 1059)
10 A
Vezeték keresztmetszet, AWG, min.
AWG 28 
Průřez vodiče, AWG, max.
AWG 14 
Hänvisning till godkännandevärden
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
353 mm
VPE Breite
136 mm
VPE height
25 mm

Type tests

Test: Durability of markings
  • Standard:
    EN 60947-1 section 5.1 / 91
  • Test:
    type identification, mark of origin, type of material
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    DIN EN 60999 section 6 / 04.94, EN 60 947-1 section 8.2.4.5.1 / 03.91
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.08 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.08 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/19
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    DIN EN 60999 section 8.4 / 04.94
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/7
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 16/7
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Pull-Out Test
  • Standard:
    DIN EN 60999 section 8.4 / 04.94
  • Requirement:
    ≥5 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/7
  • Evaluation:
    passed
  • Requirement:
    ≥30 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U1.5
    • Type of conductor and conductor cross-section:
      H07V-K1.5
    • Type of conductor and conductor cross-section:
      AWG 16/7
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed

Important note

IPC-Konformität
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Hinweise
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Max. outer diameter of the conductor: 2.9 mm
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • It is necessary to hold the insulating body of the one or two pole terminal when tightening the screw
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01