MCZ R 24VDC 1CO AU TRAK
Product image
Similar to illustration
MCZ R 24VDC 1CO AU TRAK
Product image
Similar to illustration
MCZ R 24VDC 1CO AU TRAK
Wiring diagram
MCZ R 24VDC 1CO AU TRAK
Graph
DC load limit curve
MCZ R 24VDC 1CO AU TRAK
Graph
Derating curve
MCZ R 24VDC 1CO AU TRAK
Dimensional drawing

MCZ R 24VDC 1CO AU TRAK

MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO gold-plated, Rated control voltage: 24 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No

Tuotteen tunnus 8790520000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 18 Samankaltaiset tuotteet 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO gold-plated, Rated control voltage: 24 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No  
Order No.
8790520000  
Type
MCZ R 24VDC 1CO AU TRAK  
GTIN (EAN)
4032248479535  
Qty.
10  items
Delivery status
This article will no longer be available in the future.  
Available until
30.10.2026  
Alternative product
[2773900000](~/p/2773900000)  

Dimensions and weights

Depth
63,2  mm
Depth (inches)
2,488  inch
Height
91  mm
Height (inches)
3,583  inch
Width
6,1  mm
Width (inches)
0,24  inch
Net weight
27,4  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...70 °C  
Humidity
95 % for 30 days, minimal condensation to EN 50155  
Note: room temperature (service)
+85 °C for 10 minutes  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
35d83707-6a3b-45b5-b9f8-6ba8184c863e  

Control side

Rated control voltage
24 V DC +25 % / -30 %  
Rated current DC
11.5...16.5 mA  
Power rating
195...500 mW  
Status indicator
Green LED  
Protective circuit
Free-wheeling diode  
Varistor  
Reverse polarity protection  
Max. reset time after voltage interruption
10  ms

Load side

Rated switching voltage
250 V AC  
Continuous current
6 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Max. switching voltage, DC
250  V
Min. switching power
1 mA @ 1 V  
Inrush current
6 A  
AC switching capacity (resistive), max.
1500 VA  
DC switching capacity (resistive), max.
120 W @ 24 V  
Switch-on delay
<11 ms  
Switch-off delay
<50 ms  
Contact type
1 CO contact (AgSnO gold-plated)  
Mechanical service life
10 x 106 switching cycles  

General data

Version
for railway applications  
Rail
TS 35  
Test button available
No  
Mechanical switch position indicator
No  
Open sides
right  
Colour
beige  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 5.5 mm  
Dielectric strength for control side - load side
4 kVeff / 1 s  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
4 kV (1.2/50 µs)  
Protection degree
IP20  

Connection data

Wire connection method
Tension-clamp connection  
Stripping length, rated connection
8  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
1,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 16  
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 26  
Wire cross-section, solid, max. (AWG)
AWG 16  
Wire connection cross section, finely stranded, min.
0,5  mm²
Wire connection cross section, finely stranded, max.
1,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26  
Wire cross-section, finely stranded, max. (AWG)
AWG 16  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5  mm²
Blade size
0.6 x 3.5 mm  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01