text.skipToContent text.skipToNavigation

Lataa tietosivu

WTZ4 PT100/4 C 0/4-20MA

RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA

Tuotteen tunnus 8432280000

Only remaining stock available

Ominaisuudet

General ordering data

Version	RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA
Order No.	8432280000
Type	WTZ4 PT100/4 C 0/4-20MA
GTIN (EAN)	4032248110513
Qty.	1 items
Delivery status	This article will no longer be available in the future.
Available until	22.10.2023

Dimensions and weights

Depth	112,4 mm
Depth (inches)	4,425 inch
Width	12,5 mm
Width (inches)	0,492 inch
Length	92,4 mm
Length (inches)	3,638 inch
Net weight	133 g

Temperatures

Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...55 °C

Probability of failure

SIL in compliance with IEC 61508

None

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	c2a21576-d875-4548-ae68-5e7f85ddf0c7

Input

Number of inputs	1
Sensor	PT100 (4 wire)
Sensor supply	1.45 mA
Temperature input range	Adjustable from -200...+800°C

Output

Load impedance current	≤ 500 Ω
Number of outputs	1
Output current	0...20 mA 4...20 mA

Output (analogue)

Output current

0...20 mA
4...20 mA

General data

Accuracy	100K ≤ MB < 600K: 0,.1 %; MB ≥ 600K: 0.2 %; of the MB
Configuration	DIP switch Potentiometer and PT100-Simulator
Current consumption	< 48 mA @ I_OUT = 20 mA
Galvanic isolation	Without isolation
Linearity	Yes
Rail	TS 35
Temperature coefficient	Measuring range ≥ 200 K: ≤ 200 ppm/K (typ. 80 ppm/K) 100 K <= measuring range <200 K: <225 ppm/K (typ. 90 ppm/K)
Voltage supply	24 V DC ± 20 %

Insulation coordination

EMC standards	EN 55011 EN 61000-6
Galvanic isolation	Without isolation

Connection data

Type of connection	Tension-clamp connection
Stripping length, rated connection	7 mm
Clamping range, rated connection	1,5 mm²
Clamping range, min.	0,5 mm²
Clamping range, max.	2,5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	[Application notes -- Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35431)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_206134)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.8432280000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=8432280000)
WSCAD Universe	[WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=8432280000&norm=0)
Product Change Notification	[20220218 Technical change - WAVE series’ signal conditioners WS WZ](https://mdcop.weidmueller.com/mediadelivery/asset/900_252007)
User Documentation	[Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35953)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002919
ETIM 7.0	EC002919
ETIM 8.0	EC002919
ETIM 9.0	EC002919
ECLASS 9.0	27-21-01-29
ECLASS 9.1	27-21-01-29
ECLASS 10.0	27-21-01-29
ECLASS 11.0	27-21-01-29
ECLASS 12.0	27-21-01-29
ECLASS 13.0	27-21-01-29

Tender specification sheets

Long specification

PT100 temperature measuring transformer, configured with DIP switches, 4-wire connection technology
RTD measurement isolating transformer in 12.5 mm width with external power supply,
for transmitting PT100 4-wire signals.
Input temperature range -200...+800 °C.
Analogue DC signals (0(4) to 20 mA) are available on the output side.
Zero/span compensation with potentiometer.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 92.4/ 12.5/ 112.4 mm
Tension-clamp connection / Nominal cross-section 1.5 mm²Protection degree: IP 20
Input PT100, 4-wireOutput 0/4...20 mALoad resistance Transmission error typ. 200 ppm / °C
Auxiliary power 24 VDC +/- 20 %Ambient temperature range 0°C...+55 °C
Isolation no electrical isolationApprovals cULus, CSA

Type WTZ4 PT100/4 C 0/4-20mA

Short specification

PT100 temperature measuring transformer, configured with DIP switches, 4-wire connection technology
RTD measurement isolating transformer in 12.5 mm width with external power supply,
for transmitting PT100 4-wire signals.
Input temperature range -200...+800 °C.
Analogue DC signals 0(4)...20 mA are available on the output side.
Zero/span compensation with potentiometer.

Approvals

Approvals	![CE](/picture/CE.gif) ![CSA](/picture/CSA.gif) ![CULUS](/picture/CULUS.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate no. (cULus)	E141197