LXXX 15.00/08/90F 4.5SN BK BX
Product image
LXXX 15.00/08/90F 4.5SN BK BX
Product image
LXXX 15.00/08/90F 4.5SN BK BX
Dimensional drawing
LXXX 15.00/08/90F 4.5SN BK BX
Graph
LXXX 15.00/08/90F 4.5SN BK BX
Graph
LXXX 15.00/08/90F 4.5SN BK BX
Graph
Increased power reserves
Optimised application safety
LXXX 15.00/08/90F 4.5SN BK BX
Product benefits
Increased power reserves
Optimised application safety
LXXX 15.00/08/90F 4.5SN BK BX

LXXX 15.00/08/90F 4.5SN BK BX

Bu ürün yakında mevcut olmayacak.

Printed circuit board terminals, 15.00 mm, Number of poles: 8, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box

Ürün No. 1386740000
Veri sayfasını indir Mühendislik desteği Ürün İndirmleri
İlgili ürünler 5
Dopuszczenia General ordering data Dimensions and weights Environmental Product Compliance Parametry systemu Dane materiałowe Провода, подходящие для подключения Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Упаковка Type tests Важное примечание Classifications

Dopuszczenia

인증
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(UR)
E60693 

General ordering data

버전
Printed circuit board terminals, 15.00 mm, Number of poles: 8, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box 
주문 번호
1386740000 
유형
LXXX 15.00/08/90F 4.5SN BK BX 
GTIN(EAN)
4050118187069 
수량
8 adet
Product data
IEC: 1000 V / 150 A / 0.5 - 50 mm²
UL: 600 V / 126 A / AWG 20 - AWG 1 
Packaging
Box 
배송 상태
This article will no longer be available in the future. 
마지막 주문 날짜
/Date(1773356400000)/ 

Dimensions and weights

깊이
31 mm
깊이 (인치)
1.22 inch
높이
56 mm
Height (inches)
2.205 inch
Height of lowest version
51.5 mm
너비
150 mm
Width (inches)
5.905 inch
순중량
237.75 g

Environmental Product Compliance

RoHS 준수 상태
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Parametry systemu

제품군
OMNIMATE Power — серия LXXX 
와이어 결선 방식
Clamping yoke connection 
PCB에 장착
THT solder connection 
도체 아웃렛 방향
90° 
피치(mm)(P)
15 mm
피치(인치)(P)
0.591 "
극 수
8 
핀 시리즈 수량
1 
고객 맞춤
No 
Number of rows
1 
솔더 핀 길이(l)
4.5 mm
솔더핀 크기
1.2 x 1.2 mm 
솔더 구멍 직경(D)
1.6 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
폴당 용접 핀 수
4 
스크류드라이버 블레이드
1.2 x 6.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
2.5 Nm
Tightening torque, max.
4 Nm
Clamping screw
M 6 
Stripping length
18 mm
L1 in mm
105 mm
L1 in inches
4.136 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 

Dane materiałowe

절연재
Wemid (PA) 
컬러 코드
black 
컬러 차트(유사)
RAL 9011 
절연재 그룹
I 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 600 
UL 94 가연성 등급
V-0 
접점 재질
Cu-alloy 
접점 표면
tinned 
코팅
4-6 μm SN 
용접 결선의 레이어 구조
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Провода, подходящие для подключения

클램프 범위, 최소
0.5 mm²
클램프 범위, 최대
50 mm²
결선 단면규격 AWG, 최소
AWG 20 
결선 단면규격 AWG, 최대
AWG 1 
단선, 최소 H05(07) V-U
0.5 mm²
단선, 최대 H05(07) V-U
16 mm²
꼬임, 최소 H07V-R
6 mm²
stranded, 최대 H07V-R
50 mm²
연선, 최소 H05(07) V-K
0.5 mm²
연선, 최대 H05(07) V-K
35 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0.5 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
35 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0.5 mm²
페럴 포함, DIN 46228 pt 1, 최대
35 mm²
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019180000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004090000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019210000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004110000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565700000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004130000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      10 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0565800000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0379300000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      16 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0566000000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0375200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565600000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004070000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      35 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        19 mm
    • Recommended wire-end ferrule:
      9019320000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0368900000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      50 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004210000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
150 A
정격 전류, 극 수(Tu=40°C)
150 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
1,000 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
1,000 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
1,000 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
8 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
8 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
8 kV

Rated data acc. to CSA

정격 전압(사용 그룹 B / CSA)
600 V
정격 전압(사용 그룹 C / CSA)
600 V
정격 전압(사용 그룹 D / CSA)
600 V
정격 전류(사용 그룹 B / CSA)
127 A
정격 전류(사용 그룹 C / CSA)
127 A
정격 전류(사용 그룹 D / CSA)
5 A
와이어 단면적, AWG, 최소
AWG 20 
와이어 단면적, AWG, 최대
AWG 1 

Rated data acc. to UL 1059

협회(UR)
UR 
인증 번호(UR)
E60693 
정격 전압(사용 그룹 B / UL 1059)
600 V
정격 전압(사용 그룹 C / UL 1059)
600 V
정격 전류(사용 그룹 B / UL 1059)
126 A
정격 전류(사용 그룹 C / UL 1059)
126 A
와이어 단면적, AWG, 최소
AWG 20 
와이어 단면적, AWG, 최대
AWG 1 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Упаковка

패키징
Ящик 
VPE 길이
355 mm
VPE 폭
139 mm
VPE 높이
61 mm

Type tests

테스트: 표시 내구성
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, type of material, pitch, date clock, approval marking CSA, approval marking UL, durability
  • Evaluation:
    available
테스트: 클램프 사용 가능한 단면
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 16 mm²
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      AWG 10/1
    • Type of conductor and conductor cross-section:
      AWG 1/19
    • Type of conductor and conductor cross-section:
      H07V-R50
    • Type of conductor and conductor cross-section:
      H07V-K35
  • Evaluation:
    passed
컨덕터의 손상 및 의도치 않은 느슨해짐 테스트
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    2.0 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed
풀아웃 테스트
  • Standard:
    DIN EN 60999 section 8.5 / 04.94
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    ≥ 90N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    > 236 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    > 190 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed

Важное примечание

IPC 준수
Заявление о соответствии: все изделия разрабатываются, производятся и поставляются в соответствии с установленными международными стандартами и нормами и соответствуют характеристикам, указанным в технической документации, а также обладают декоративными свойствами в соответствии с IPC-A-610, "Класс 2". Любые другие запросы информации об изделиях могут быть рассмотрены по запросу. 
참고 사항
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • IP 20 from 16 mm² to 50 mm²
  • The test point can only be used as potential-pickup point.
  • Wire-end ferrules are mandatory for stranded wires with more than 19 strands.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01