DRIKIT 24VAC 1CO LD
Product image
Similar to illustration
DRIKIT 24VAC 1CO LD
Wiring diagram
DRIKIT 24VAC 1CO LD
Graph
DC load limit curve
Resistive load
DRIKIT 24VAC 1CO LD
Graph
Electrical service life
DRIKIT 24VAC 1CO LD
Graph
AC operational voltage range
DRIKIT 24VAC 1CO LD
Dimensional drawing
DRIKIT 24VAC 1CO LD
Miscellaneous
Type codes

DRIKIT 24VAC 1CO LD

D-SERIES DRI, Modulo a relè, Numero di contatti: 1, Contatto di scambio AgSnO, Tensione nominale: 24 V AC, Corrente permanente: 10 A, Collegamento a vite, Tasto di prova disponibile: No

Produkt ID 2476710000
Åbn i konfiguratoren
Download datablad Engineering Support Produkt Downloads
Tilbehør 10 Enkeltdele 3 Anvendte produkter 14
Approvals Dati generali per l’ordinazione Dimensions and weights Températures Conformité environnementale du produit Côté commande 부하 측 일반 데이터 절연 조정 Further details of approvals / standards Dati di collegamento Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

Dati generali per l’ordinazione

Version
D-SERIES DRI, Modulo a relè, Numero di contatti: 1, Contatto di scambio AgSnO, Tensione nominale: 24 V AC, Corrente permanente: 10 A, Collegamento a vite, Tasto di prova disponibile: No 
Order No.
2476710000 
Type
DRIKIT 24VAC 1CO LD 
GTIN (EAN)
4050118496932 
Qty.
10 Styk

Dimensions and weights

Depth
67,7 mm
깊이 (인치)
2,665 inch
Height
80,2 mm
Height (inches)
3,157 inch
Width
15,8 mm
Width (inches)
0,622 inch
Net weight
51,744 g

Températures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Conformité environnementale du produit

RoHS Compliance Status
Conforme avec exemption 
RoHS Exemption (if applicable/known)
7cI 
REACH SVHC
No SVHC above 0.1 wt% 

Côté commande

Rated control voltage
24 V AC 
Rated current AC
50 mA 
Power rating
1.2 VA 
Coil resistance
240 Ω ± 10 % 
Statusanzeige
red LED 

부하 측

Rated switching voltage
250 V AC 
Continuous current
10 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

일반 데이터

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Colour
black 
Komponent s klasifikací hořlavosti UL 94
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

절연 조정

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
4 kVeff / 1 Min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Dati di collegamento

Wire connection method
스크류 결선 
Stripping length, rated connection
8 mm
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,8 Nm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,25 mm²
4 mm²
Leiteranschlussquerschnitt, eindrähtig, min.
0,25 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Klingenmaß
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01