ACT20P-AI-AO-DC-P
Produktbild
ACT20P-AI-AO-DC-P
Anschlussbild
ACT20P-AI-AO-DC-P
Typenschlüssel
ACT20P-AI-AO-DC-P
Maßzeichnung
ACT20P-AI-AO-DC-P
ACT20P-AI-AO-DC-P
ACT20P-AI-AO-DC-P
Zeichnung

ACT20P-AI-AO-DC-P

Analogue isolating amplifier, Input : I/U universal, Output : I/U universal, Signal converter/isolator, 24 V DC power supply

Tuotteen tunnus 2456860000
Lataa tietosivu Engineering Support Software Support Product Downloads
Lisävarusteet 2 Yksittäiset osat 1 Samankaltaiset tuotteet 8
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Connection data Part description Classifications

Approvals

Zulassungen
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Ausfuehrung
Analogue isolating amplifier, Input : I/U universal, Output : I/U universal, Signal converter/isolator, 24 V DC power supply 
Best.-Nr.
2456860000 
Art
ACT20P-AI-AO-DC-P 
GTIN (EAN)
4050118471793 
Qty.
1 items

Dimensions and weights

Tiefe
113,7 mm
Depth (inches)
4,476 inch
Höhe
127,1 mm
Height (inches)
5,004 inch
Breite
12,5 mm
Width (inches)
0,492 inch
Net weight
130 g

Temperatures

Lagertemperatur
-25 °C...70 °C 
Betriebstemperatur
-20 °C...60 °C 
Feuchtigkeit bei Betriebstemperatur
0...95 % (no condensation) 
Humidity
10…90 %, no condensation 

Probability of failure

SIL gemäß IEC 61508
None 

Environmental Product Compliance

RoHS-Konformitätsstatus
Compliant with exemption 
RoHS-Ausnahme (falls zutreffend/bekannt)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Anzahl Eingänge
1 
Auflösung
3.5 µA / 1.76 mV per bit 
Bemeneti ellenállás, áram
100 Ω 
Input current
configurable 
0-22 mA (min. measurement range 4 mA) 
Input voltage
configurable 
0-11 V (min. measurement range 2 V) 
Résistance d'entrée entrée tension
≥ 1 MΩ 
Sensor supply
24 V DC 

Output

Anzahl der Ausgänge
1 
Ausgangsspannung, Bemerkung
Adjustable 
0...11 V 
Output range, min, 2 V 
Ausgangsstrom
Adjustable 
0...22 mA 
Output range, min, 4 mA 
Lastwiderstand / Strom
1 kΩ @ 20 mA 
Lastwiderstand Spannung
> 600 Ω @ 10 V 
Offsetspannung
≤ 20 mV 
Typ
active 
connected control must be passive 

General data

Configuration
DIP switch 
Front push-button 
with reference voltage/current sources 
Liniowość
<± 0.1 % of signal range 
Typ. ± 0.05 % of signal range 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Power consumption, typ.
3 W
Supply voltage
12...60 V DC 
Temperaturkoefficient
<0.05 % / °C 
Время переходного процесса
350 ms 
보호 등급
IP20 

Insulation coordination

EMC 표준
EN 61326-1 
Galvanic isolation
3-way isolator 
between input ⁄ output ⁄ supply 
Pollution severity
2 
Surge voltage category
III 
Tensione impulsiva massima
4 kV (1.2/50 µs) 
Напряжение развязки
2 kV inputs / outputs 

Connection data

Anschlussart
PUSH IN 
Anzugsdrehmoment, min.
0,4 Nm
Anzugsdrehmoment, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,2 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

Product description
The universally configurable DC isolating amplifier ACT20P-AI-AO-DC/AC-x isolates and converts analogue signals.
An analogue input signal (current or voltage) is linearly converted into an analogue output signal (current or voltage) and galvanically isolated.
The power supply is galvanically isolated from input and output (3-way isolation).

Features
  • Universally configurable via DIP switches and operating buttons
  • Active or passive signal input
  • Front LED indicates operation status
  • 3-way galvanic isolation between input, output and power supply
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20