LUFS 10.00/03/180V 5.0SN BK BX
Product image
LUFS 10.00/03/180V 5.0SN BK BX
Product image
LUFS 10.00/03/180V 5.0SN BK BX
Dimensional drawing
LUFS 10.00/03/180V 5.0SN BK BX
Derating curve
LUFS 10.00/03/180V 5.0SN BK BX
Derating curve
LUFS 10.00/03/180V 5.0SN BK BX
Derating curve
LUFS 10.00/03/180V 5.0SN BK BX
Product benefits
Power up to UL 600 V
Offset solder pins
LUFS 10.00/03/180V 5.0SN BK BX
Product benefits
Simple actuation of the contact point

LUFS 10.00/03/180V 5.0SN BK BX

Printed circuit board terminals, 10.00 mm, Number of poles: 3, 180°, Solder pin length (l): 5 mm, tinned, black, PUSH IN with actuator, Clamping range, max. : 16 mm², Box

Tuotteen tunnus 2492120000
Lataa tietosivu Engineering-support Produktdownloads
Lisävarusteet 1 Samankaltaiset tuotteet 12
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certifikat nr (cURus)
E60693 

General ordering data

Version
Printed circuit board terminals, 10.00 mm, Number of poles: 3, 180°, Solder pin length (l): 5 mm, tinned, black, PUSH IN with actuator, Clamping range, max. : 16 mm², Box 
Order No.
2492120000 
Type
LUFS 10.00/03/180V 5.0SN BK BX 
GTIN (EAN)
4050118559859 
Förp.
40 items
Product data
IEC: 1000 V / 101 A / 0.5 - 25 mm²
UL: 600 V / 57 A / AWG 18 - AWG 4 
Packaging
Box 

Dimensions and weights

Depth
24,7 mm
Byggdjup (tum)
0,972 inch
Height
36,3 mm
Height (inches)
1,429 inch
Height of lowest version
31,3 mm
Width
31,58 mm
Width (inches)
1,243 inch
Net weight
24,906 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Power - series LU 
Wire connection method
PUSH IN with actuator 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
180° 
Pitch in mm (P)
10 mm
Pitch in inches (P)
0,394 "
Number of poles
3 
Polradstal
1 
Fitted by customer
No 
Number of rows
1 
Solder pin length (l)
5 mm
Solder pin dimensions
d = 1.2 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,6 mm
Tolerans diameter bestyckningshål (D)
+ 0,1 mm 
Antal lödstift per pol
2 
Skruvmejselklinga
0.8 x 4.0 
Stripping length
18 mm
L1 in mm
20 mm
L1 in inches
0,787 "
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
IP20 

Material data

Isolierstoff
Wemid (PA) 
Färgkod
black 
Färg manöverelement
orange 
Farbtabelle (ähnlich)
RAL 9011 
Insulating material group
I 
Kúszóútképzési összehasonlítási szám (CTI)
≥ 600 
Brännbarhetsklass enligt UL 94
V-0 
Kontaktbasismaterial
E-Cu 
Kontaktmaterial
Cu-alloy 
Kontaktyta
tinned 
Schichtaufbau - Lötanschluss
4...10 µm Sn matt 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−40 °C
Operating temperature, max.
120 °C

Conductors suitable for connection

Klemmbereich, min.
0,5 mm²
Clamping range, max.
16 mm²
przekrój przyłącza przewodu AWG, min.
AWG 18 
Wire connection cross section AWG, max.
AWG 4 
rigido, min. H05(07) V-U
0,5 mm²
entrådig, max. H05(07) V-U
16 mm²
Flertrådig, min. H07 V-R
6 mm²
flertrådig, max. H07V-R
25 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
16 mm²
med ändhylsa, DIN 46228 pt 1, min.
0,5 mm²
mit Aderendhülse nach DIN 46 228/1, max.
16 mm²
Passtift enligt EN 60999 a x b; ø
5.4 mm x 5.1 mm; 5.3 mm 
Klemmbare Leiter
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019180000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004090000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019210000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004110000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565700000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004130000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      10 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0565800000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0379300000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      16 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0566000000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0375200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565600000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004070000
Referenstext
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60947-7-4 
Märkström, min. antal poler (Tu=20°C)
101 A
Номинальный ток, макс. кол-во контактов (Tu = 20 °C)
85,8 A
Bemessungsstrom, min. Polzahl (Tu=40°C)
101 A
정격 전류, 최대 극 수(Tu=40°C)
76 A
Tensión nominal con categoría de sobretensión/grado de polución II/2
1 000 V
Rated voltage for surge voltage class / pollution degree III/2
1 000 V
Märkspänning vid överspänningskat./Nedsmutsningsgrad III/3
1 000 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
6 kV
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad III/2
8 kV
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad III/3
8 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
600 V
Rated voltage (Use group C / CSA)
600 V
Rated voltage (Use group D / CSA)
600 V
Rated current (Use group B / CSA)
57 A
Rated current (Use group C / CSA)
57 A
Rated current (Use group D / CSA)
5 A
Wire cross-section, AWG, min.
AWG 18 
Wire cross-section, AWG, max.
AWG 4 

Rated data acc. to UL 1059

Institute (cURus)
CURUS 
Certificate No. (cURus)
E60693 
Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Märkspänning (användargrupp D / UL 1059)
600 V
Rated voltage (Use group F / UL 1059)
1 000 V
Rated current (Use group B / UL 1059)
57 A
Märkström (användargrupp C / UL 1059)
57 A
Märkström (användargrupp D / UL 1059)
5 A
Rated current (Use group F / UL 1059)
57 A
Ledardiameter AWG, min.
AWG 18 
Wire cross-section, AWG, max.
AWG 4 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
268 mm
VPE width
168 mm
VPE height
46 mm

Type tests

Test: Durability of markings
  • Standard:
    IEC 60947-1 section 8.2.4.5.1 / 06.07, IEC 60512-1-1:2002-02
  • Test:
    mark of origin, type identification, pitch, durability, stripping length
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    IEC 60999-1 section 7 and 9.1 / 11.99, IEC 60947-1 section 8.2.4.5.1 / 03.11
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 16 mm²
    • Type of conductor and conductor cross-section:
      stranded 16 mm²
    • Type of conductor and conductor cross-section:
      H07V-U16
    • Type of conductor and conductor cross-section:
      H07V-U6
    • Type of conductor and conductor cross-section:
      H07V-K16
    • Type of conductor and conductor cross-section:
      AWG 4
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    2.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U16
    • Type of conductor and conductor cross-section:
      H07V-K16
  • Evaluation:
    passed
  • Requirement:
    4,5 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 4/7
    • Type of conductor and conductor cross-section:
      AWG 4/19
  • Evaluation:
    passed
Pull-out test
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥100 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U16
    • Type of conductor and conductor cross-section:
      H07V-K16
  • Evaluation:
    passed
  • Requirement:
    ≥ 135 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 4/7
    • Type of conductor and conductor cross-section:
      AWG 4/19
  • Evaluation:
    passed

Important note

IPC shoda
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required clearances and creepage distances should be observed in the application
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01