ACT20M-FRQ-AO-S
Product image
ACT20M-FRQ-AO-S
Connection diagram
ACT20M-FRQ-AO-S
Dimensioned drawing
ACT20M-FRQ-AO-S
ACT20M-FRQ-AO-S

ACT20M-FRQ-AO-S

Frequency signal converter, including rail bus supply, Input : Frequency, Output : 0(4)-20 mA, 0(2)-10 V

Ürün No. 2825020000
Konfigüratörde aç
Veri sayfasını indir Mühendislik desteği Yazılım desteği Ürün İndirmleri
Aksesuarlar 5 İlgili ürünler 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Connection data EMC conformity and approvals Part description Classifications

Approvals

ROHS
Conform 

General ordering data

Utförande
Frequency signal converter, including rail bus supply, Input : Frequency, Output : 0(4)-20 mA, 0(2)-10 V 
Art.nr.
2825020000 
Typ
ACT20M-FRQ-AO-S 
GTIN (EAN)
4064675360834 
Qty.
1 adet

Dimensions and weights

Djup
114,3 mm
Depth (inches)
4,5 inch
Höjd
112,5 mm
Height (inches)
4,429 inch
Bredd
6,1 mm
Width (inches)
0,24 inch
Net weight
80 g

Temperatures

Lagertemperatur
-40 °C...85 °C 
Drifttemperatur
-25 °C...70 °C 
Humidity
0...95 % (no condensation) 

Environmental Product Compliance

RoHS-kompatibilitetsstatus
Compliant with exemption 
RoHS-undantag (om tillämpligt/känt)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input frequency
adjustable 
0…100kHz 
Number inputs
1 
Sensor
NAMUR sensor, according to EN60947-5-6 
NPN / PNP transistor (trig-level low: ≤4 V high: ≥7 V ) 
TTL (trig-level low: ≤0.8 V high: ≥2.0 V) 
Tacho (trig-level low: ≤-50 mV high: ≥+50 mV) 
Special current (trig-level: user-defined) 
Special voltage (trig-level: user-defined) 
S0 (trig-level low: ≤2.2 mA high: ≥9.0 mA ) 
Sensor supply
5…17 V 

Output

Antal utgångar
1 
Lastmotstånd spänning
≥ 10 kΩ 
Lastmotstånd ström
≤ 600 Ω 
Output behaviour on failure upscale
23 mA
Output signal limit
<28 mA 
Produktionsbeteende vid nedskalning av misslyckanden
3,5 mA
Typ
active 
connected control must be passive 
Utgångsspänning, kommentar
0(2)...10 V 
0(1)...5 V 
0(0,2)…1 V 
Utgångsström
0...20 mA 
4...20 mA 
in case of sensor error 
downscale (3,5 mA) 
upscale (23 mA) 

General data

IP20 
Accuracy
Basic accuracy: 0.0002 Hz 
Configuration
DIP switch or via FDT/DTM software 
Mounting rail
TS 35 
Nominal power consumption
0,5 VA
Operating altitude
≤ 2000 m 
Power consumption, max.
1,2 W
Power consumption, typ.
0,65 W
Step response time
≤ 30 ms 
(0…90% / 100…10% of input level) 
Supply voltage
24 V DC ±30 % at terminal or via CH20M rail bus 
Temperature coefficient
≤0,01% of measurement range⁄°C 

Insulation coordination

EMC standards
IEC 61326-1 
Galvanic isolation
3-way isolator 
Insulation voltage
2.5 kVeff /1 min. 
Pollution severity
2 
Rated voltage
250 V 
300 V 
Surge voltage category
II 

Connection data

Anslutningstyp
Screw connection 
Åtdragningsmoment, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

EMC conformity and approvals

EMC-Normer
IEC 61326-1 
Нормы
IEC 61010-1 

Part description

Product description
The universal frequency measuring transducer, which can be configured via software, disconnects and converts input signals (frequency, Namur, NPN, PNP, speedometer, TTL and S0) into an active analogue standard output signal. The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring. The model ACT20M-FRQ-AO-S can be supplied via the Weidmüller DIN rail bus 

Classifications

ETIM 8.0
EC002918 
ETIM 9.0
EC002918 
ETIM 10.0
EC002918 
ECLASS 14.0
27-21-01-28 
ECLASS 15.0
27-21-01-28