text.skipToContent text.skipToNavigation

Download datablad Anvendte produkter

VSSC6 CL 48VAC/DC 0.5A

Surge protection for instrumentation and control, Surge protection for measurement and control, U_P(L/N-PE) 770 V

Produkt ID 1064190000

Egenskaber

General ordering data

Version	Surge protection for instrumentation and control, Surge protection for measurement and control, U_P(L/N-PE) 770 V
Order No.	1064190000
Type	VSSC6 CL 48VAC/DC 0.5A
GTIN (EAN)	4032248829569
Qty.	10 Styk

Dimensions and weights

Depth	81 mm
Depth (inches)	3,189 inch
Height	88,5 mm
Height (inches)	3,484 inch
Width	6,2 mm
Width (inches)	0,244 inch
Net weight	40,6 g

Temperatures

Storage temperature	-40 °C...80 °C
Operating temperature	-40 °C...70
Humidity	5...96 %

Probability of failure

SIL in compliance with IEC 61508	2
MTTF	6.008 a
SFF	89,74 %
λges	19
PFH in 1*10^-9 per hour	1.95

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	7a, 7cI
REACH SVHC	Lead 7439-92-1
SCIP	71e97bb7-979f-4330-94c0-20c629bb05e3

Rated data UL

Certificate No. (UL)	E311081
UL certificate	[UL Zertifikat](PDF/E311081VOL1SEC3.pdf)

CSA protection data

Gas group C	IIB
Gas group D	IIA
Gas groups A, B	IIC
Input current, max. I_I	500 mA
Input voltage, max. U_i	85 V
Internal capacity, max. C_I	1 nF
Internal inductance, max. L_I	0 µH

General data

Colour	black
Design	Terminal
Isolating function	No
Optical function display	No
Protection degree	IP20
Rail	TS 35
Segment	Measurement - Monitoring - Setting
UL 94 flammability rating	V-0
Version	Surge protection for measurement and control

Insulation coordination acc. to EN 50178

Pollution severity	2
Surge voltage category	III

Rated data IEC / EN

Discharge current I_max (8/20µs) wire-PE	5 kA
Discharge current I_max (8/20µs) wire-wire	5 kA
Discharge current I_n (8/20µs) wire-PE	2.5 kA
Discharge current I_n (8/20µs) wire-wire	2.5 kA
Discharge current, max. (8/20 µs)	10 kA
Fuse	0.5 A
Insertion loss	250 MHz
Lightning test current I_imp (10/350 µs)	0.5 kA
Lightning test current, I_imp (10/350 µs) Wire-PE	0.5 kA
Max. continuous voltage, Uc (AC)	60 V
Max. continuous voltage, Uc (DC)	85 V
Number of poles	1
Overload - failure mode	Modus 2
Protection level on output side Wire-wire 1 kV/µs, typically	70 V
Protection level U_P (typ.)	770 V
Protection level, U_P wire - wire	200 V
Pulse-reset capacity	≤ 150 ms
Rated current I_N	500 mA
Rated voltage (AC)	48 V
Rated voltage (DC)	68 V
Requirements category acc. to IEC 61643-21	C2 C3 D1
Signal transmission properties (-3 dB)	5 Mhz
Standards	IEC 61643-21 HART-compatible
Surge current-carrying capacity C2	2.5 kA
Surge current-carrying capacity C3	50 A
Surge current-carrying capacity D1	0,5 kA
Voltage type	AC/DC
Volume resistance	1.8 Ω 10 %

Further details of approvals

GOST certificate

[GOST-Zertifikat](PDF/7950_n1-n4.pdf)

Connection data

Stripping length	10 mm
Type of connection	Screw connection
Tightening torque, min.	0,5 Nm
Tightening torque, max.	0,8 Nm
Clamping range, min.	0,5 mm²
Clamping range, max.	4 mm²
Wire cross-section, solid, min.	0,5 mm²
Wire cross-section, solid, max.	6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	4 mm²
Connection cross-section, stranded, min.	0,5 mm²
Connection cross-section, stranded, max.	4 mm²

Electrical data

Voltage type

AC/DC

General data

Number of poles	1
Protection degree	IP20
Colour	black

Ratings IECEx/ATEX/cUL

cUL certificate

[cUL Certificate](pdf/VSSC.PDF)

Important note

Product information

Mode 2: State where the voltage-limiting part of the SPD was short-circuited due to a very low impedance within the SPD. The line is inoperable, but the measuring equipment is still protected by means of a short-circuit.

Downloads

Approval/Certificate/Document of Conformity	[SIL Paper](https://mdcop.weidmueller.com/mediadelivery/asset/900_35329) [EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86289)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_60111)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.1064190000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1064190000)
User Documentation	[Beipackzettel / Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35338)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC000943
ETIM 7.0	EC000943
ETIM 8.0	EC000943
ETIM 9.0	EC000943
ECLASS 9.0	27-13-08-07
ECLASS 9.1	27-13-08-07
ECLASS 10.0	27-13-08-07
ECLASS 11.0	27-13-08-07
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90
ECLASS 14.0	27-17-90-90

Tender specification sheets

Long specification

Surge protection in a one piece, 6.2 mm wide DIN rail module for a floating-ground signal circuit with 48 V UC, 2-wire technology. A current loop with max. 0.6A can be protected here. When the terminal is fitted, a simultaneous electrically conducting contact is made between the mounting rail (earth) and the reference potential (ground) of the protection circuit in the terminal. Optical identification of the terminal based on the type of protected switching and the voltage level. The terminal can be labelled or marked.

Short specification

Surge protection in a one piece, 6.2 mm wide DIN rail module for a floating-ground driven signal circuit with 2-wire technology and a common wire. Version: 48V UC

Approvals

Approvals	![CE](/picture/CE.gif) ![CSAEX](/picture/CSAEX.gif) ![FUSAFETY](/picture/FUSAFETY.gif) ![OEVE](/picture/OEVE.gif) ![UL](/picture/UL.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate No. (UL)	E311081