Ominaisuudet
| Version | Klippon BDX (compensating elements), Compensating element, M 20, 10 mm, IP66, Brass, nickel-plated |
| Order No. | 2519540000 |
| Type | KLIPPON BDX M20 BN |
| GTIN (EAN) | 4050118532067 |
| Qty. | 1 items |
| Height | 12 mm |
| Height (inches) | 0,472 inch |
| Width | 27 mm |
| Width (inches) | 1,063 inch |
| Length | 22 mm |
| Length (inches) | 0,866 inch |
| Net weight | 60 g |
| Operating temperature | -60 °C...200 °C |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c |
| REACH SVHC | Lead 7439-92-1 |
| Approval conditions |
ATEX
IECEX UL AEx Class Div. UL AEx Class Zone |
| Certificate no. cable gland (ATEX) | CML 19ATEX3347X |
| Certificate no. cable gland (CSA) | E340660 |
| Certificate no. cable gland (IECEx) | IECEx CML 19.0105X |
| Identification |
Ex e IIC Gb
Ex ta IIIC Da |
| AF size 1 | 27 mm |
| Air flow | 0.25 l / 1 h |
| Cable glands | M 20 |
| Explosion protection type | Improved safety Ex e |
| External thread | M 20 |
| Filter | Bronze insert (90% copper, 10% tin) |
| Halogen | halogen-free |
| Head diameter | 26,2 mm |
| Impact resistance | 7 J ATEX version |
| Length of thread | 10 mm |
| Material | Brass, nickel-plated |
| Note: protection class | - The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. - The supplied assembly instructions must be read prior to installation and strictly adhered to. - The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. |
| O-Ring | Silicone |
| Operating temperature range, max. | 200 °C |
| Operating temperature range, min. | −60 °C |
| Pitch of thread | 1,5 mm |
| Protection class (UL) | Type 4 |
| Protection degree | IP66 |
| Protection degree with GWDR | IP66 |
| Sealing | Silicone |
| Silicone | Yes |
| Standards |
IEC 60079-0
IEC 60079-7 IEC 60079-31 |
| Tightening torque | 5 Nm |
| Torque for connecting adapter, max. | 5 Nm |
| Torque for connecting adapter, min. | 5 Nm |
| Torque for lock nut, max. | 5 Nm |
| Torque for lock nut, min. | 5 Nm |
| UL 94 flammability rating | None |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_72098) |
| Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.2519540000) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2519540000) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC000814 |
| ETIM 7.0 | EC000814 |
| ETIM 8.0 | EC000814 |
| ETIM 9.0 | EC000814 |
| ECLASS 9.0 | 27-14-44-25 |
| ECLASS 9.1 | 27-14-44-90 |
| ECLASS 10.0 | 27-14-44-25 |
| ECLASS 11.0 | 27-14-44-25 |
| ECLASS 12.0 | 27-18-28-17 |
| ECLASS 13.0 | 27-18-28-17 |
| ECLASS 14.0 | 27-18-28-17 |
| ROHS | Conform |