VPU II 1 1000V/40KA AC
Product image
Similar to illustration
VPU II 1 1000V/40KA AC
Electric symbol
Schematic circuit diagram

VPU II 1 1000V/40KA AC

Bu ürün yakında mevcut olmayacak.

Available until: 01.06.2026

Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase, TN

Ürün No. 1473440000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 1 İlgili ürünler 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase, TN 
Order No.
1473440000 
Type
VPU II 1 1000V/40KA AC 
GTIN (EAN)
4050118279689 
Qty.
1 adet
Delivery status
This article will no longer be available in the future. 
Available until
01.06.2026 

Dimensions and weights

Depth
69 mm
Depth (inches)
2,717 inch
Height
94 mm
Height (inches)
3,701 inch
Width
17,8 mm
Width (inches)
0,701 inch
Mounting dimension - height
75 mm
Net weight
194,22 g

Temperatures

Storage temperature
-40 °C...80 °C 
Ambient temperature
-40 °C…70 °C 
Operating temperature
-40 °C...70 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 

General data

Colour
black 
orange 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 
UL 94 flammability rating
V-0 
Version
without telecomm. contact 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Ansprechzeit / Rückfallzeit
≤ 25 ns 
Avledningsström Imax. (8/20 µs) ledare-PE
40 kA 
Avledningsström In (8/20 µs) ledare-PE
20 kA 
Discharge current In (8/20µs) N-PE
20 kA 
Follow-on current extinguishing capability Ifi
Not available due for technical reasons 
Frequency range, max.
60 Hz
Fuse protection
125 A gL > (if back up fuse > 125 A) 
No Fuse neccessary ≤125 A gG 
Integrated back-up fuse
No 
Koordynacja energii (≤10 m)
Type II 
Type III 
Kortslutningsström ISCCR (Short Circuit Current Rating)
25 kA
Követelmény kategória az IEC 61643-11 szerint
Type II 
Leakage current at Un
0,7 mA
Low voltage network
Single-phase 
TN 
Number of poles
1 
Rated voltage (AC)
830 V
Requirements class, acc. to EN 61643-11
T2 
Signalling contact
No 
Skyddsnivå Up vid IN (L/N-PE)
≤ 3.7 kV 
Standards
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
1.205 V
Tensione permanente massima, Uc (AC)
1000 V 
Voltage type
AC 
Zona de frecuencia, min.
50 Hz
방전 전류 I최대 (8/20µs) N-PE
40 kA 

Connection data

Stripping length
15 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
15 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
35 mm²
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
16 mm²
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
1,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
50 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
50 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
1 
Protection degree
IP20 
Colour
black 
orange 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02 

Tender specification sheets

Long specification
Multi-pole lightning arrester in accordance with level II requirements (IEC 61643-11, EN61643-11:2013). The arrester provides overvoltage protection in applications in acc. with IEC 61643-12. The use of a high-performance varistor meets the inspection requirements for level II surge protection devices (SPD) on the basis of the standards. The arrester is installed in the vicinity of the power supply for the equipment requiring protection, in a commercially available installation/electrical distribution housing. The VPU II 1 1000 V/40 kA AC is used in the single-phase mains network. With thermal cut-off mechanism on the varistor. In case of insufficient protection, the colour in the display window changes from green to red. Rated voltage: 1000V AC In/max (8/20µs): 20/40 kA protection level < 3.8 kV 25 kA short-circuit strength with max. backup fuse of 250A of the same type: Weidmüller VPU II 1 1000V/40KA AC Order no. 1473440000 or equivalent. 
Short specification
Class II arrester with In/Imax: 20/40 kA, suitable for single-phase 1000 V mains systems. Protection level < 3.8 kV. Type: Weidmüller VPU II 1 1000V/40KA AC, Order no. 1473440000 or equivalent