ACT20P-CI-CO-ILP-P
Similar to illustration
ACT20P-CI-CO-ILP-P
Connection diagram
ACT20P-CI-CO-ILP-P
Dimensioned drawing
ACT20P-CI-CO-ILP-P
Similar to illustration
ACT20P-CI-CO-ILP-P
Drawing

ACT20P-CI-CO-ILP-P

Passzív leválasztó, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA, Bemeneti áramhurokból táplált

Produkt-ID 7760054357
Öppna i konfiguratorn
Ladda ner datablad Engineering Support Product Downloads
Aksesuarlar 2 Münferit parçalar 1 İlgili ürünler 14
Homologaciones Informations générales de commande Dimensions and weights Températures Probability of failure Conformité environnementale du produit Input Output General data Insulation coordination Data for Ex applications (ATEX) Размеры Part description Klassificeringar

Homologaciones

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319231/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURusEX)
E338066 
Certificate no. (cULus)
E469563 

Informations générales de commande

Version
Passzív leválasztó, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA, Bemeneti áramhurokból táplált 
Order No.
7760054357 
Type
ACT20P-CI-CO-ILP-P 
GTIN (EAN)
4050118559712 
Qty.
1 adet

Dimensions and weights

Depth
114 mm
Profondità (pollici)
4,488 inch
Height
127,1 mm
Bygghöjd (tum)
5,004 inch
Width
12,5 mm
Width (inches)
0,492 inch
Net weight
93 g

Températures

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

Probability of failure

SIL in compliance with IEC 61508
Нет 

Conformité environnementale du produit

RoHS Compliance Status
Conforme avec exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input current
0(4)...20 mA current loop 
Number inputs
1 
Sensor
4- wire sensor (with own power supply) 
Current source 
Voltage drop, current input
3,8 V 

Output

Load impedance current
≤ 600 Ω 
Number of outputs
1 
Output current
0…20 mA (if input: 0…20 mA) 
4…20 mA (if input: 4…20 mA) 
Type
active 
connected control must be passive 

General data

Accuracy
<0.1 % of end value 
Configuration
none 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Protection degree
IP20 
Step response time
≤ 1 ms 
Supply voltage
Loop powered, via 4…20 mA input 
Temperature coefficient
≤ 100 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Galvanic isolation
2-way isolator 
Impulse withstand voltage
3 kV (1.2/50µs) 
Insulation voltage
2.5 kV (input / output) 
Pollution severity
2 
Rated voltage
300 V 
Surge voltage category
III 

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T6 Gc 
Marking
II 3 G Ex ec IIC T6 Gc 

Размеры

Type of connection
PUSH IN 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

Product description
The ACT20P-CI-CO-ILP-S fixed passive isolators isolate analogue standard current source signals. An analogue input current signal is converted linear and galvanic isolated into an analogue output current signal. The device is powered via the input current loop.

Features
  • Galvanic 2-way isolation (single-channel device) between input and output.
 

Klassificeringar

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20