ACT20P-CI-VO-S
Similar to illustration
ACT20P-CI-VO-S
Connection diagram
ACT20P-CI-VO-S
Dimensioned drawing
ACT20P-CI-VO-S
Similar to illustration

ACT20P-CI-VO-S

Amplificatore di isolamento analogico, Ingresso : 0(4)-20 mA, Uscita : 0-10 V, Convertitori di segnali con separazione

Product ID 1540010000
Openen in configurator
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 2 Afzonderlijke onderdelen 1 Verwante producten 15
Agréments Dati generali per l’ordinazione Dimensions et poids Temperature Probability of failure Conformità ambientale del prodotto Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data Part description Classifications

Agréments

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_322323/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E366074 
Certificate no. (cULusEX)
E338066 

Dati generali per l’ordinazione

Version
Amplificatore di isolamento analogico, Ingresso : 0(4)-20 mA, Uscita : 0-10 V, Convertitori di segnali con separazione 
Order No.
1540010000 
Type
ACT20P-CI-VO-S 
GTIN (EAN)
4050118344745 
Qty.
1 items

Dimensions et poids

Depth
113,7 mm
깊이 (인치)
4,476 inch
Height
117,2 mm
Height (inches)
4,614 inch
Width
12,5 mm
Width (inches)
0,492 inch
Net weight
147 g

Temperature

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

Probability of failure

SIL in compliance with IEC 61508
None 

Conformità ambientale del prodotto

RoHS Compliance Status
Conforme con esenzione 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input current
0...20 mA 
4…20mA 
Input signal
2-/3-wire transmitter 
Current source 
Number inputs
1 
Sensor
2-wire transmitter (without own power supply) 
3-wire sensor 
4- wire sensor (with own power supply) 
Sensor supply
> 17 V DC at 20 mA 
Voltage drop
≤ 1 V 

Output

Load impedance current
≤ 550 Ω 
load impedance voltage
≥ 600 kΩ 
Number of outputs
1 
Output voltage, note
0…10 V (if input: 0…20 mA) 
2…10 V (if input: 4…20 mA) 
Type
aktiv 
angeschlossene Steuerung muss passiv sein 

General data

Accuracy
±0,1 % FSR max., 0,05 % FSR typ. 
Configuration
none 
Current consumption
≤60 mA (24V power supply, 20mA output) 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Protection degree
IP20 
Step response time
≤ 0,5 ms 
Supply voltage
20…30 V DC 
Temperature coefficient
80 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Galvanic isolation
3-way isolator 
between input ⁄ output ⁄ supply 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
2 kV (Input /Output), 1 min, 50 Hz 
Pollution severity
2 
Surge voltage category
III 
Test voltage
0,3 kV

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T5 Gc 
Marking
II 3 G Ex ec IIC T5 Gc 

Connection data

Type of connection
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
0,6 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 

Part description

Product description
The fixed DC repeater ACT20P-CI-VO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is converted linear and galvanic isolated into an analogue output voltage signal. The power supply is galvanically isolated from input and output (3-way isolation).

Features
  • The active or passive mA current signal inputs are completely electrically isolated.
  • Front LED indicates operation status.
  • 3-way galvanic isolation between input, output and power supply
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20