Sensor isolation

Compact and powerful solid-state relays to isolate sensor signals

In order to reliably decouple sensor signals from the field, spacesaving and fast-switching coupling elements are required. We offer special solid-state relays for sensor isolation, as well as relay modules with gold-plated contacts for reliable switching of small currents and voltages, as they typically occur when switching sensor signals.

Solid-state relay for sensor isolation (TERMOPTO and TERMSERIES)
As there is often a high number of switching cycles in sensor isolation, it makes sense to use solid-state relays. They have no mechanical wear and therefore work reliably in the long term. Our solid-state relays are extremely compact and, thanks to suitable accessories, enable quick installation. By using TERMSERIES interface adapters in conjunction with pre-assembled cables, the wiring time can be reduced further.

Electromechanical relays with gold contacts (TERMSERIES)
In applications where sensor isolation is only carried out at longer intervals and with low power (< 30 V/10 mA), oxide layers can form on the contacts. This usually occurs in applications where signals are forwarded to control inputs or PLC systems. Due to the low loads, there is not enough light arcing at the contacts to remove the oxide layer during switching. Therefore, relay modules with oxidation-resistant gold contacts are used.
Sensor isolation
TERMOPTO
TERMOPTO
TERMSERIES
TERMSERIES
  1. Application range

  2. Izolace snímače

  3. 160 prodotti trovati