S2L 3.50/40/180F 3.5SN BK BX
Product image
S2L 3.50/40/180F 3.5SN BK BX
Product image
S2L 3.50/40/180F 3.5SN BK BX
Dimensional drawing

S2L 3.50/40/180F 3.5SN BK BX

PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 40, 180°, Solder pin length (l): 3.5 mm, tinned, black, Box

Produkt ID 2559380000
Download datablad Engineering-support Produktdownloads
Tilbehør 3 Anvendte produkter 39
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Material data Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

버전
PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 40, 180°, Solder pin length (l): 3.5 mm, tinned, black, Box 
주문 번호
2559380000 
유형
S2L 3.50/40/180F 3.5SN BK BX 
GTIN (EAN)
4050118894653 
Qty.
24 Styk
Product data
IEC: 250 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 

Dimensions and weights

깊이
10,5 mm
Depth (inches)
0,413 inch
높이
17,7 mm
Height (inches)
0,697 inch
Height of lowest version
14,2 mm
너비
77 mm
Width (inches)
3,031 inch
Масса нетто
10,539 g

Environmental Product Compliance

RoHS 준수 상태
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System specifications

Famille de produits
OMNIMATE Signal - series B2L/S2L 3.50 - 2-row 
Type de raccordement
Board connection 
PCB에 장착
THT solder connection 
피치(mm)(P)
3,5 mm
Pitch in inches (P)
0,138 "
외향 엘보
180° 
Number of poles
40 
Number of solder pins per pole
1 
Longueur du picot à souder (l)
3,5 mm
Solder pin dimensions
d = 1.0 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
L1 in mm
66,5 mm
L1 in inches
2,62 "
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Can be coded
Yes 
Plugging force/pole, max.
5 N
Pulling force/pole, max.
4 N
Tightening torque
  • Torque type:
    Mounting screw, PCB
  • Usage information:
    • Tightening torque:
      • min.:
        0,1 Nm
      • max.:
        0,15 Nm
    • Recommended screw:
      • Part number:
        1610740000

Material data

Materiał izolacyjny
PBT 
Barwny
black 
Colour chart (similar)
RAL 9011 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Materiał styków
Cu-alloy 
Contact surface
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
−30 °C
Temperature range, installation, max.
100 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Prąd znamionowy, min. liczba biegunów (Tu=20°C)
10 A
Prąd znamionowy, maks. liczba biegunów (Tu=20°C)
10 A
Rated current, min. number of poles (Tu=40°C)
9 A
Rated current, max. number of poles (Tu=40°C)
8,5 A
Rated voltage for surge voltage class / pollution degree II/2
250 V
Rated voltage for surge voltage class / pollution degree III/2
125 V
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/3
80 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 77 A 

Rated data acc. to CSA

정격 전압(사용 그룹 B / CSA)
150 V
정격 전류(사용 그룹 B / CSA)
5 A

Rated data acc. to UL 1059

Tension nominale (groupe d'utilisation B / UL 1059)
150 V
Rated current (Use group B / UL 1059)
10 A

Packing

패키징
Box 
VPE 길이
338 mm
Larghezza VPE
130 mm
VPE 높이
27 mm

Important note

IPC 준수
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
참고 사항
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • For additional mechanical support for male connectors with screw flange (…F), we recommend an additional cable gland with fastening screws (sheet metal screw ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C – see Accessories). Cable gland only permitted before soldering.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01