S2L 3.50/42/90G 3.5SN OR BX
Product image
S2L 3.50/42/90G 3.5SN OR BX
Product image
S2L 3.50/42/90G 3.5SN OR BX
Dimensional drawing

S2L 3.50/42/90G 3.5SN OR BX

PCB plug-in connector, male header, closed side, THT solder connection, 3.50 mm, Number of poles: 42, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Box

Ürün No. 2559780000
Veri sayfasını indir Engineering Support Produkt Downloads
Aksesuarlar 5 İlgili ürünler 42
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Material data Rated data acc. to IEC Rated data acc. to CSA Dati di dimensionamento sec. UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, male header, closed side, THT solder connection, 3.50 mm, Number of poles: 42, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Box 
Order No.
2559780000 
Type
S2L 3.50/42/90G 3.5SN OR BX 
GTIN (EAN)
4050118668889 
Qty.
18 Pieza
Valores característicos del producto
IEC: 250 V / 10 A
UL: 150 V / 10 A 
Embalaje
Box 

Dimensions and weights

Depth
14,2 mm
Depth (inches)
0,559 inch
Height
14 mm
Height (inches)
0,551 inch
Height of lowest version
10,5 mm
Width
74,9 mm
Width (inches)
2,949 inch
Net weight
10,929 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System specifications

Product family
OMNIMATE Signal - series B2L/S2L 3.50 - 2-row 
Type of connection
Board connection 
Mounting onto the PCB
THT solder connection 
Pitch in mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
90° 
Nombre de pôles
42 
Numero di codoli a saldare per polo
1 
Solder pin length (l)
3,5 mm
Solder pin dimensions
d = 1,0 mm 
ośmiokątny 
Solder eyelet hole diameter (D)
1,3 mm
Tolerans diameter bestyckningshål (D)
+ 0,1 mm 
L1 i mm
70 mm
L1 i tum
2,758 "
Polradstal
2 
Beröringsskydd enligt DIN VDE 57
fingers. ej inst./ handryggss. instucken 
Beröringsskydd enligt DIN VDE 0470
IP 20 ansluten/ IP 10 ej ansluten 
Koderbar
Ja 
Plugging force/pole, max.
5 N
Pulling force/pole, max.
4 N

Material data

Insulating material
PBT 
Colour
orange 
Colour chart (similar)
RAL 2000 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
Classe d'inflammabilité selon UL 94
V-0 
Contact material
Stop Cu 
Contact surface
förtennad 
Skiktstruktur för lödanslutningen
2...3 µm Ni / 5...7 µm Sn glansig 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-30 °C
Temperature range, installation, max.
100 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
10 A
Rated current, max. number of poles (Tu=20°C)
10 A
Rated current, min. number of poles (Tu=40°C)
9 A
Rated current, max. number of poles (Tu=40°C)
8,5 A
Rated voltage for surge voltage class / pollution degree II/2
250 V
Rated voltage for surge voltage class / pollution degree III/2
125 V
Rated voltage for surge voltage class / pollution degree III/3
80 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5 kV
Short-time withstand current resistance
3 x 1s mit 77 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
150 V
Rated current (Use group B / CSA)
5 A

Dati di dimensionamento sec. UL 1059

Rated voltage (Use group B / UL 1059)
150 V
Rated current (Use group B / UL 1059)
10 A

Packing

Packaging
Box 
VPE length
338 mm
VPE width
130 mm
VPE height
27 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01