VPU I 3 R 280V/25KA

Surge voltage arrester, Low voltage, with remote contact, TN-C

Item No. 2062910000

Version	Surge voltage arrester, Low voltage, with remote contact, TN-C
Order No.	2062910000
Type	VPU I 3 R 280V/25KA
GTIN (EAN)	4050118414707
Qty.	1 items
Delivery status	This article will no longer be available in the future.
Available until	31.03.2024
Alternative product	[2726750000](~/p/2726750000)

Connection type	PUSH IN
Cross-section for connected wire, solid core, max.	1.5 mm²
Cross-section for connected wire, solid core, min.	0.14 mm²
Stripping length	8 mm

Colour	black orange
Design	Installation housing; 6 TE Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20
Rail	TS 35
Segment	Power distribution
UL 94 flammability rating	V-0
Version	with remote contact

Pollution severity	2
Surge voltage category	IV

Discharge current I_max (8/20µs) wire-PE	100 kA
Discharge current I_n (8/20µs) wire-PE	25 kA
Discharge current, I_imp (10/350 µs)	25 kA
Energy coordination (≤10 m)	Type I Type II Type III
Follow-on current extinguishing capability I_fi	Not available due for technical reasons
Fuse	No Fuse neccessary ≤250 A gG 250 A gL (if back up fuse > 250 A)
Leakage current at U_n	100 µA
Lightning test current I_imp(10/350 µs) (L-PE)	25 kA
Low voltage network	TN-C
Mains voltage	230 V / 400 V
Max. continuous voltage, Uc (AC)	280 V
Number of poles	3
Protection level U_p at I_N (L/N-PE)	≤ 1.4 kV
Rated load current I_L	125 A
Rated voltage (AC)	230 V
Requirements category acc. to IEC 61643-11	Type I Type II
Requirements class, acc. to EN 61643-11	T1 T2
Response time	≤ 100 ns
Short-circuit current rating I_SCCR	25 kA
Signalling contact	250 V 1A 1CO
Standards	IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV	438 V
Voltage type	AC

Stripping length	15 mm
Type of connection	Screw connection
Stripping length, rated connection	15 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	4 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	2.5 mm²
Wire cross-section, solid, max.	16 mm²
Wire connection cross section, finely stranded, min.	2.5 mm²
Wire connection cross section, finely stranded, max.	25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	50 mm²
Connection cross-section, stranded, min.	2.5 mm²
Connection cross-section, stranded, max.	50 mm²

Approval/Certificate/Document of Conformity	[EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86293)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_65868)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.2062910000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2062910000)
User Documentation	[Beipackzettel / Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35398)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)