Egenskaber
| Order No. | 2921610000 |
| Type | TOP PCU DC650 500 |
| GTIN (EAN) | 4099986615038 |
| Qty. | 1 Styk |
| Depth | 130 mm |
| Depth (inches) | 5,118 inch |
| Height | 130 mm |
| Height (inches) | 5,118 inch |
| Width | 50 mm |
| Width (inches) | 1,968 inch |
| Net weight | 999 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -25 °C...70 °C |
| Humidity at operating temperature | 5…95 % rel. humidity, no condensation |
| Blackout voltage, max. | 400 V |
| Blackout voltage, min. | 0 V |
| Connection system | PUSH IN |
| Emergency voltage, max. | 600 V |
| Emergency voltage, min. | 400 V |
| Input fuse (internal) | 5 A |
| Overvoltage error, min. | 1.200 V |
| Overvoltage, max. | 1.200 V |
| Overvoltage, min. | 880 V |
| Rated current | 1,5 A |
| Rated input voltage, max. | 750 |
| Reverse polarity protection (L+, L- reverse polarity) | 100 % |
| Standby power consumption (pre charge completed) | 7 W |
| Temporary overvoltage for 5 sec, max. | 880 V |
| Temporary overvoltage for 5 sec, min. | 800 V |
| Rated input voltage | 650 V |
| Connection system | PUSH IN |
| DC charge current, max. | 7,2 A |
| Maximum capacitive load of DC sector | 8,13 mF |
| Pre charge time, typ. | 2 s (max. 4 s) |
| Rated output voltage (L+PC) corresponds to rated input voltage | Yes |
| Type of current limiting | Constant current |
| Maximum current of DC sector | 500,5 A |
| Output voltage (+ 20 %) | 24 V |
| Rated current | 1,5 A |
| Housing version | Metal, corrosion resistant |
| Mains buffering time, min. | 20 ms |
| Maximum device capacity, typ. | 100 µF |
| Maximum operating altitude | 5.000 m |
| Mounting position (Regard derating) | Any |
| MTBF |
|
| Protection circuits | Over temperature protection |
| Protection degree | IP20 |
| Surge voltage category | II |
| Interference immunity test acc. to | DIN EN IEC 61000-6-2 |
| Shock resistance IEC 60068-2-27 | 30 g in all directions |
| Vibration resistance IEC 60068-2-6 | 4 g |
| Insulation voltage input / earth | 6 kV |
| Insulation voltage output / earth | 6 kV |
| Insulation voltage, input/output | 6 kV |
| Pollution severity | 2 |
| Protection class | I, with PE connection |
| Surge voltage category | II |
| DC grid behavior 400 … 880 V DC according to | System concept DC Industry V3 |
| Conductor cross-section, AWG/kcmil , max. | 4 AWG |
| Conductor cross-section, AWG/kcmil , min. | 18 AWG |
| Conductor cross-section, flexible , min. | 0,5 mm² |
| Conductor cross-section, rigid , max. | 16 mm² |
| Conductor cross-section, rigid , min. | 0,5 mm² |
| Connection system | PUSH IN |
| Screwdriver blade | 0.8 x 4.0 |
| Screwdriver blade (input) | 0.8 x 4.0 |
| Wire connection cross section, flexible (input), max. | 25 mm² |
| Conductor cross-section, AWG/kcmil , max. | 4 AWG |
| Conductor cross-section, AWG/kcmil , min. | 18 AWG |
| Conductor cross-section, flexible , max. | 25 mm² |
| Conductor cross-section, flexible , min. | 0,5 mm² |
| Conductor cross-section, rigid , max. | 16 mm² |
| Conductor cross-section, rigid , min. | 0,5 mm² |
| Connection system | PUSH IN |
| Screwdriver blade | 0.8 x 4.0 |
| Stripping length (output) | 18 mm |
| Screwdriver blade (signal) | 0.4 x 2.5 |
| Wire connection cross-section, flexible (signal), max. | 1,5 mm² |
| Wire connection cross-section, flexible (signal), min. | 0,2 mm² |
| Wire connection method | PUSH IN |
| Wire cross-section, AWG/kcmil , max. | 14 |
| Wire cross-section, AWG/kcmil , min. | 24 mm² |
| Wire cross-section, solid , max. | 1,5 mm² |
| Wire cross-section, solid , min. | 0,2 mm² |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_305244) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 7.0 | EC002045 |
| ETIM 8.0 | EC002045 |
| ETIM 9.0 | EC002045 |
| ECLASS 11.0 | 27-04-07-02 |
| ECLASS 12.0 | 27-04-07-02 |
| ECLASS 13.0 | 27-04-07-02 |