ACT20M-RTCI-CO-OLP-S   Item No. 1435590000

Temperature converter, 2-/3-/4- wire RTD, Thermocouple, Input : Temperature, Output : 4-20 mA, (loop powered)

Please note that any possible discounts or additional costs are not yet applied here. The definitive payment amounts will be shown in the cart.



Order No. 1435590000  
Version Temperature converter, 2-/3-/4- wire RTD, Thermocouple, Input : Temperature, Output : 4-20 mA, (loop powered)  
GTIN (EAN) 4050118240641  
Qty. 1 ST  
Width 6.1 mm  
Width (inches) 0.240157 inch  
Height 112.5 mm  
Height (inches) 4.429125 inch  
Depth 114.3 mm  
Depth (inches) 4.499991 inch  
Net weight 80 g  
Humidity 40 °C / 93 % rel. humidity, no condensation  
Storage temperature, max. 85 °C  
Storage temperature, min. -40 °C  
Ambient temperature -25 °C...+70 °C  
Storage temperature -40 °C...85 °C  
MTBF 207 Years  
REACH SVHC Lead 7439-92-1  
UL certificate [E337701.pdf](PDF/QUYX.E337701.pdf)  
Number of inputs 1  
Sensor PT100 / 2-/3-/4-wire  
Thermocouple acc. to IEC 584, type: J  
Thermocouple acc. to IEC 584, type: K  
Influence of the sensor cable resistance < 0.002 Ω⁄Ω  
Input measurement range PT100 -200…+850 °C  
Line resistance in measuring circuit 50 Ω@ RTD (Pt100)  
10 kΩ @ TC (J, K)  
Temperature input range Configurable  
min. measurement range 10°C (RTD)  
min. measurement range 50°C (TC)  
Number of outputs 1  
Output current 20…4 mA  
Wire break detection 3.5 mA ⁄ 23 mA ⁄ none  
cold junction compensation configurable internal or external cold-junction compensation (thermocouple)  
Supply voltage (output) 16,8 V…31,2 V  
Accuracy absolute accuracy: < ±0.05 % of the measurement range  
RTD (PT100) Basic accuracy: < ±0.1 °C of the measurement range  
TC (J,K) Basic accuracy: < ±0.5 °C of the measurement range  
Cold-junction compensation error ±(2.0 °C + 0.4 °C x Δt) Δt = inside temperature – ambient temperature  
Configuration 0 °C  
Galvanic isolation 2-way isolator  
Power consumption, max. 0.8 W  
Power consumption, typ. 0.5 W  
Rail TS 35  
Step response time ≤ 30 ms  
Temperature coefficient TC (J,K) 0.1 °C ⁄ °C  
Voltage supply Output loop powered  
6…35 V  
EMC standards IEC 61326-1  
NE 21  
Galvanic isolation 2-way isolator  
Insulation voltage 2.5 kVeff /1 min.  
Pollution severity 2  
Rated voltage 300 Veff  
Surge voltage category II  
Marking II 3 G Ex nA IIC T4 Gc  
Type of connection Screw connection  
Tightening torque, min. 0.4 Nm  
Tightening torque, max. 0.6 Nm  
Clamping range, rated connection 2.5 mm²  
Clamping range, min. 0.5 mm²  
Clamping range, max. 2.5 mm²  
Wire connection cross section AWG, min. AWG 30  
Wire connection cross section AWG, max. AWG 14  
Certificate No. (ATEX) KEMA10ATEX0183X  
Certificate No. (IECEX) IECEXKEM10.0090X  
Certificate no. (cULus) E337701  
IECEx - gas labelling Ex nA IIC T4 Gc  
Product information The ACT20M-RTCI-CO-OLP-S passive configurable temperature transducer isolates and converts analogue signals. An analogue RTD (Type Pt100) or TC (Type J, K) input signal is linearly converted into an analogue output signal and galvanically isolated. Power is supplied through the output measurement circuit (output- loop powered).  
Approval/Certificate/Document of Conformity [DNV-GL certificate](  
[EAC certificate](  
[FM certificate](  
[IECEXx certificate](  
[ATEX certificate](  
[Declaration of Conformity](  
Brochure/Catalogue [CAT 4.1 ELECTR 16/17 EN](  
Engineering Data [EPLAN, WSCAD, Zuken E3.S](LINK/CAE_EN.html)  
Engineering Data [STEP](  
CADENAS eCATALOG [Cax data](  
Software [DIP switch configuration tool](  
User Documentation [instruction sheet](  
ETIM 6.0 EC002919  
ETIM 7.0 EC002919  
eClass 9.0 27-21-01-29  
eClass 9.1 27-21-01-29  
eClass 10.0 27-21-01-29  
Approvals ![CULUS](/picture/CULUS.gif) ![DETNORVER](/picture/DETNORVER.gif) ![DNVGL](/picture/DNVGL.gif) ![EAC](/picture/EAC.gif) ![FMEX](/picture/FMEX.gif) ![IECEXKEM](/picture/IECEXKEM.gif) ![KEMAATEX](/picture/KEMAATEX.gif)  
ROHS Conform  
UL File Number Search [E337701](LINK/UL_search.html)  


  • Item No.