TOP1.5GS 01/180 7.62 OR EEXE
Product image
Similar to illustration
TOP1.5GS 01/180 7.62 OR EEXE
Dimensional drawing

TOP1.5GS 01/180 7.62 OR EEXE

This product is discontinued.

Printed circuit board terminals, 7.62 mm, Number of poles: 1, 180°, Solder pin length (l): 4.5 mm, tinned, orange, TOP connection, Clamping range, max. : 2.5 mm², Box

Item No. 1859100000
Download data sheet Product Downloads
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Packing Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 7.62 mm, Number of poles: 1, 180°, Solder pin length (l): 4.5 mm, tinned, orange, TOP connection, Clamping range, max. : 2.5 mm², Box 
Order No.
1859100000 
Type
TOP1.5GS 01/180 7.62 OR EEXE 
GTIN (EAN)
4032248411191 
Qty.
100 items
Product data
IEC: / 0.5 - 2.5 mm²
UL: 
Packaging
Box 
Delivery status
Discontinued 
Available until
31.10.2021 

Dimensions and weights

Depth
18.5 mm
Depth (inches)
0.728 inch
Height
24 mm
Height (inches)
0.945 inch
Height of lowest version
19.5 mm
Width
9.42 mm
Width (inches)
0.371 inch
Net weight
4.12 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series TOP1.5GS 
Wire connection method
TOP connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
180° 
Pitch in mm (P)
7.62 mm
Pitch in inches (P)
0.3 "
Number of poles
1 
Pin series quantity
1 
Fitted by customer
No 
Number of rows
1 
Solder pin length (l)
4.5 mm
Solder pin dimensions
0.8 x 1.0 mm 
Solder eyelet hole diameter (D)
1.3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
2 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping screw
M 2.5 
Stripping length
10 mm
L1 in mm
0 mm
L1 in inches
0 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.20 mΩ 

Material data

Insulating material
PA 
Colour
orange 
Colour chart (similar)
RAL 2000 
Insulating material group
I 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 flammability rating
V-2 
Contact material
CuZn 
Contact surface
tinned 
Layer structure of solder connection
1.5...3 µm Ni / 4...6 µm Sn 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0.13 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Solid, min. H05(07) V-U
0.5 mm²
Solid, max. H05(07) V-U
2.5 mm²
Flexible, min. H05(07) V-K
0.5 mm²
Flexible, max. H05(07) V-K
2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0.5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2.5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025860000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9019100000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0186500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0635100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004080000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Short-time withstand current resistance
3 x 1s with 120 A 

Packing

Packaging
Box 
VPE length
130 mm
VPE width
104 mm
VPE height
66 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002643 
ETIM 7.0
EC002643 
ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 9.0
27-44-04-01 
ECLASS 9.1
27-44-04-01 
ECLASS 10.0
27-44-04-01 
ECLASS 11.0
27-46-01-01 
ECLASS 12.0
27-46-01-01 
ECLASS 13.0
27-46-01-01 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01