PAS CMR 0,5...2,5 A DC

Current monitoring, 0.5...2.5 A DC, 1, Screw connection

Produkt ID 8742610000

General ordering data

Version	Current monitoring, 0.5...2.5 A DC, 1, Screw connection
Order No.	8742610000
Type	PAS CMR 0,5...2,5 A DC
GTIN (EAN)	4032248413928
Qty.	10 Styk

Dimensions and weights

Depth	95 mm
Depth (inches)	3,74 inch
Height	16 mm
Height (inches)	0,63 inch
Width	15,3 mm
Width (inches)	0,602 inch
Length	92 mm
Length (inches)	3,622 inch
Net weight	69,6 g

Temperatures

Storage temperature	-40 °C...85 °C
Operating temperature	-20 °C...60 °C
Humidity at operating temperature	0...95 % (no condensation)
Humidity	5-95% relative humidity, T_u = 40°C, without condensation

Probability of failure

SIL in compliance with IEC 61508

None

Environmental Product Compliance

RoHS Compliance Status	Compliant
REACH SVHC	No SVHC above 0.1 wt%

General data

Configuration	none
Galvanic isolation	between input ⁄ output ⁄ supply ⁄ relay
Nominal power consumption	1,5 VA
Protection degree	IP20
Rail	TS 35
Temperature coefficient	350 ppm/K

Insulation coordination

EMC standards	EN 55011 EN 61000-6-1, 2, 3, 4
Galvanic isolation	between input ⁄ output ⁄ supply ⁄ relay
Impulse withstand voltage	6 kV
Insulation voltage	4 kV_eff / 1 min.
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Input

Input current	0.5...2.5 A DC
Input resistance, current	<50 mΩ
Making current threshold	≤ 500 mA
Max. current	7.5 A for 10 s
Pulse duration	min. 1 ms
Secure off	≤ 50 mA

Output

Contact assembly	1 NO contact
Contact material	RH/Rd (Reed contact)*
Continuous current	100 mA
Max. switching frequency	20 Hz
Max. switching voltage, AC	250 V
Max. switching voltage, DC	100 V
Number of outputs	1
Switching current	2 A
Switching voltage AC, min.	1 V
Switching voltage DC, min.	1 V
Temperature coefficient	350 ppm/K

Connection data

Type of connection	Screw connection
Clamping range, rated connection	1,5 mm²
Clamping range, min.	2,5 mm²
Clamping range, max.	2,5 mm²

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format

Classifications

ETIM 6.0	EC002654
ETIM 7.0	EC002654
ETIM 8.0	EC002654
ETIM 9.0	EC002654
ETIM 10.0	EC002654
ECLASS 9.0	27-21-01-22
ECLASS 9.1	27-21-01-22
ECLASS 10.0	27-21-01-22
ECLASS 11.0	27-21-01-22
ECLASS 12.0	27-21-01-22
ECLASS 13.0	27-21-01-22
ECLASS 14.0	27-21-01-22
ECLASS 15.0	27-21-01-22

Tender specification sheets

Long specification

Limit-value monitoring of DC currents up to 2.5 A with switching output
limit-value monitoring component for measuring DC currents 0.5... 2.5 A with
switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.

Pluggable unit on base, for mounting on TS35 DIN rail
Dimensions: L/W/H 92/ 15.3/ 95 mm
Screw connection / Nominal cross-section 2.5 mm²Protection degree: IP 20

Input                        0.5...2.5 A DC / Reed relay coil
Switch-on threshold < 500 mA
Switch-off threshold      < 50 mA
Output                                             1 NO / Reed contact
Switching current max 100 mA AC/DC
Switching voltage 100 V AC / 50 V DC
Ambient
temperature range 0 °C...+55 °C

Secure isolation                   EN 50178, 2-way isolation up to 6 kV
Test voltage                               4 kVeff / 1 min. input against output
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus

Type PAS CMR 0.5...2.5 A DC

Short specification

Approvals