电涌保护器VSSC4 TAZ 48VAC/DC
电涌保护器VSSC4 TAZ 48VAC/DC
电涌保护器VSSC4 TAZ 48VAC/DC
电涌保护器VSSC4 TAZ 48VAC/DC

电涌保护器VSSC4 TAZ 48VAC/DC

Surge protection for instrumentation and control, Surge protection for measurement and control

Ürün No. 1064090000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 2 İlgili ürünler 3
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Rated data UL CSA protection data General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Further details of approvals Connection data Electrical data General data Ratings IECEx/ATEX/cUL Important note Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319227/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319238/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge protection for instrumentation and control, Surge protection for measurement and control 
Order No.
1064090000 
Type
VSSC4 TAZ 48VAC/DC 
GTIN (EAN)
4032248829507 
Qty.
10 adet

Dimensions and weights

Depth
58,5 mm
Depth (inches)
2,303 inch
Height
76 mm
Height (inches)
2,992 inch
Width
6,2 mm
Width (inches)
0,244 inch
Net weight
26 g

Temperatures

Storage temperature
-40 °C...80 °C 
Operating temperature
-40 °C...70 °C 
Humidity
5...96 % 

Probability of failure

SIL согласно IEC 61508
3 
MTTF
3 567 a
SFF
100 %
λges
32 
PFH in 1*10-9 per hour
0 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
71e97bb7-979f-4330-94c0-20c629bb05e3 

Rated data UL

UL-certifikat
[UL Zertifikat](PDF/E311081VOL1SEC3.pdf) 

CSA protection data

Gasgruppe A, B
IIC 
Gasgruppe D
IIA 
Gruppo di gas C
IIB 
Ingångsspänning, max. Ui
85 V
Internal inductance, max. LI
0 µH 
Внутренняя емкость, макс. Cвн.
1 nF 
입력-전류, 최대 II
20 A 

General data

Byggform
Terminal 
Colour
black 
Indicatore ottico di funzionamento
No 
Isolating function
No 
Mounting rail
TS 35 
Protection degree
IP20 
Segment
Measurement - Monitoring - Setting 
UL 94 flammability rating
V-0 
Исполнение
Surge protection for measurement and control 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Capacitance
0.45 nF 
Discharge current Imax (8/20µs) wire-PE
0,1 kA 
Discharge current In (8/20µs) wire-PE
0.2 kA 
Discharge current, max. (8/20 µs)
0,1 kA
Max. continuous voltage, Uc (AC)
60 V 
Max. continuous voltage, Uc (DC)
85 V 
Number of poles
1 
Overload - failure mode
Mode 1 
Rated current IN
20 A
Rated load current IL
20 A
Rated voltage (AC)
48 V
Rated voltage (DC)
75 V 
Standards
According to IEC61643-21 
Surge current-carrying capacity C3
15 A 
Voltage type
AC/DC 
Volume resistance
<0.1 Ω 

Further details of approvals

GOST certificate
[GOST-Zertifikat](PDF/7950_n1-n4.pdf) 

Connection data

Abisolierlänge
10 mm
Anschlussart
Screw connection 
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,8 Nm
Clamping range, min.
0,5 mm²
4 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Connection cross-section, stranded, min.
0,5 mm²
Connection cross-section, stranded, max.
4 mm²

Electrical data

Rodzaj napięcia
AC/DC 

General data

Количество полюсов
1 
Protection degree
IP20 
Colour
black 

Ratings IECEx/ATEX/cUL

cUL-Zertifikat
[cUL Certificate](pdf/VSSC.PDF) 

Important note

Product information
Mode 1: State where the voltage-limiting part of the SPD was disconnected. The voltage limiting function is no longer available, but the cable is still functional. 

Classifications

ETIM 8.0
EC000943 
ETIM 9.0
EC000943 
ETIM 10.0
EC000943 
ECLASS 14.0
27-17-15-01 
ECLASS 15.0
27-17-15-01 

Tender specification sheets

Hosszspecifikáció
Feed-through terminal, 6.2 mm wide with suppressor diodes between the signal line connection and the mounting rail potential, TS 35 contact base.A signal with max. 32A can be protected here. When the terminal is fitted, a simultaneous electrically conducting contact is made between the mounting rail (earth) and the reference potential (ground) of the protection circuit in the terminal. Optical identification of the terminal based on the type of protected switching and the voltage level. The terminal can be labelled or marked. 
Especificación corta
Feed-through terminal with suppressor diode between the signal line connection and the mounting rail potential, TS 35 contact base. Version: 48 V UC