CH20M12 B BUS BK/OR 2010
Product image
CH20M12 B BUS BK/OR 2010
Product image
CH20M12 B BUS BK/OR 2010
Product benefits
Base element including BUS cut-out
CH20M12 B BUS BK/OR 2010
Dimensioned drawing

CH20M12 B BUS BK/OR 2010

Modular housing, OMNIMATE Housing - series CH20M black, Base element, Recess in detent foot area for BUS contact, Width: 12.5 mm

Produkt ID 1176980000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 4 Anvendte produkter 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Material data General data Assembly properties Mechanical tests Thermal tests Component properties Design - IN requirements Individualization options Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Wersja
Modular housing, OMNIMATE Housing - series CH20M black, Base element, Recess in detent foot area for BUS contact, Width: 12.5 mm 
Заказ №
1176980000 
Тип
CH20M12 B BUS BK/OR 2010 
GTIN (EAN)
4032248970469 
Qty.
14 Styk

Dimensions and weights

Depth
108 mm
Depth (inches)
4,252 inch
Высота
109,3 mm
Height (inches)
4,303 inch
Ширина
12,5 mm
Width (inches)
0,492 inch
Net weight
34,57 g

Temperatures

Ambient temperature
-25 °C…85 °C 
Operating temperature range
-40...120 ℃ 
Humidity
5 - 93% rel. humidity, Tu = 40°C, no condensation 

Environmental Product Compliance

RoHS-kompatibilitetsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Material data

Basic material
Plastic 
Comparative Tracking Index (CTI)
600 ≤ CTI 
Insulating material
PA 66 GF 30 
Insulating material group
I 
Surface finish
untreated 
UL 94 flammability rating
V-0 

General data

Colour
black 
Colour chart (similar)
RAL 9011 
Encapsulation option
No 
Mounting rail
TS 35 
Protection degree
IP20 in installed state 

Assembly properties

Number of slots for female connectors of the mounted assembly, max.
6 
Number of PCBs, max.
1 
Number of connection levels, max.
3 
Number of poles, max.
12 
Height of components on the PCB, max.
6,1 mm
Type of assembly of the PCB
double-sided 

Mechanical tests

Enligt standard
DIN EN 61373:1999 (shock and vibration) 
Test conditions
five housings installed in a row 
100g additional weight on the PCB 
Proved axles
X 
Y 
Z 
Shock test
  • General test advices:
    All mechanical tests were tested on examplary setup, or in view of depending regulation. The specified results do not replace approval relevant tests. They are just orientation values.
  • Test category:
    1
  • Number of shocks per axle:
    3 in positive and negative direction
  • Shock duration:
    30 ms
  • Acceleration horizontal:
    30 m/s²
  • Acceleration vertical:
    30 m/s²
  • Acceleration longitudinal:
    50 m/s²
Vibration test
  • Test category:
    1B
  • Test duration:
    5 hours per axle
  • Effective acceleration:
    7,9 m/s²

Thermal tests

Thermal tests
  • General test advices:
    All thermal tests were tested on examplary setup, or in view of depending regulation. The specified results do not replace approval relevant tests. They are just orientation values.
  • Test conditions:
    seven housings installed in a row - no spacing
  • Test axles:
    horizontal
  • Ambient temperature:
    80 °C
  • Power dissapation, max.:
    0,8 W
  • Ambient temperature:
    60 °C
  • Power dissapation, max.:
    1,35 W
  • Ambient temperature:
    40 °C
  • Power dissapation, max.:
    1,9 W
  • Ambient temperature:
    20 °C
  • Power dissapation, max.:
    2,65 W

Component properties

Color of clip-on foot
orange 
Cut out in clip-on foot area as preperation for
BUS-contact 
contact not included! 
Number of connection levels, max.
3 

Design - IN requirements

Spessore circuito stampato
1,6 mm
Tolérance du contour des circuits imprimés
±0.1 mm 
회로 보드 두께의 공차
±0.15 mm 

Individualization options

Alternitive colours
More on request 
Customer specific order process
See guideline under downloads 
Kundenspezifische Beschriftung möglich
Yes 
Posibilidades de procesamiento
Laser processing 

Important note

Produktinformation
Circuit board contour, restricted zones, and other information for the design in of the circuit board can be found in the category connection technology under the corresponding male headers in the downloads. 

Classifications

ETIM 8.0
EC001031 
ETIM 9.0
EC001031 
ETIM 10.0
EC001031 
ECLASS 14.0
27-19-06-01 
ECLASS 15.0
27-19-06-01