LS 5.08/10/90 3.5SN OR BX
Product image
LS 5.08/10/90 3.5SN OR BX
Product image
LS 5.08/10/90 3.5SN OR BX
Dimensional drawing
LS 5.08/10/90 3.5SN OR BX
Graph

LS 5.08/10/90 3.5SN OR BX

Tämä tuote ei ole enää saatavana.

Vaihtoehtoinen tuote: 1234620000

Printed circuit board terminals, 5.08 mm, Number of poles: 10, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 1.5 mm², Box

Tuotteen tunnus 1912910000
Lataa tietosivu Tekninen tuki Tuotelataukset
Samankaltaiset tuotteet 5
Godkännanden General ordering data Mått och vikter Environmental Product Compliance Системные параметры Materialdata Przewody pasujące do złącza Rated data acc. to IEC Märkdata enligt CSA Rated data acc. to UL 1059 Packaging Type tests Important note Classifications

Godkännanden

Omologazioni
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
N° certificato (cURus)
E60693 

General ordering data

Versione
Printed circuit board terminals, 5.08 mm, Number of poles: 10, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 1.5 mm², Box 
N. d’ordine
1912910000 
Tipo
LS 5.08/10/90 3.5SN OR BX 
GTIN (EAN)
4032248542406 
CPZ
50 items
Product data
IEC: 630 V / 17.5 A / 0.08 - 1.5 mm²
UL: 300 V / 15 A / AWG 28 - AWG 14 
Packaging
Box 
Stato consegna
This article will no longer be available in the future. 
마지막 주문 날짜
/Date(1774821600000)/ 
Prodotto alternativo
[1234620000](~/p/1234620000) 

Mått och vikter

Profondità
8,1 mm
奥行き（インチ）
0,319 inch
Posizione verticale
13,8 mm
Height (inches)
0,543 inch
Height of lowest version
10,3 mm
Larghezza
51,3 mm
Width (inches)
2,02 inch
Peso netto
10,36 g

Environmental Product Compliance

Stato conformità RoHS
Compliant with exemption 
Esenzione RoHS (se applicabile/nota)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
bf16c6c7-a337-4c4d-8703-f321e4125514 

Системные параметры

Famiglia prodotti
OMNIMATE Signal — серия LS 
Tecnica di collegamento cavi
Clamping yoke connection 
Montaggio su circuito stampato
THT solder connection 
Direzione d'uscita del conduttore
90° 
Passo in mm (P)
5,08 mm
Passo in pollici (P)
0,2 "
Numero di poli
10 
ピンモデルシリーズ数量
1 
assemblabile da parte del cliente
Yes 
Number of rows
1 
Egy sorban található szomszédos pólusok max. száma
24 
Forrasztótüske hossza (l)
3,5 mm
Dimensioni del codolo a saldare
0.5 x 1.0 mm 
Diametro foro di equipaggiamento (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
폴당 용접 핀 수
1 
스크류드라이버 블레이드
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping screw
M 2.5 
Stripping length
6 mm
L1 in mm
45,72 mm
L1 in inches
1,8 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Materialdata

Materiale isolante
Wemid (PA) 
Colori
orange 
Tabella dei colori (simile)
RAL 2000 
Gruppo materiali isolanti
I 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 可燃性等級
V-0 
Materiale dei contatti
Cu-alloy 
접점 표면
tinned 
Struttura a strati del collegamento a saldare
5...8 µm Sn 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Przewody pasujące do złącza

Campo di sezioni, min.
0,08 mm²
Campo di sezioni, max.
1,5 mm²
Sezione di collegamento cavo AWG, min.
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
rigido, min. H05(07) V-U
0,08 mm²
rigido, max. H05(07) V-U
1,5 mm²
Flessibile, min. H05(07) V-K
0,08 mm²
Flessibile, max. H05(07) V-K
1,5 mm²
con terminale AEH con collare DIN 46 228/4, min.
0,25 mm²
con terminale AEH con collare DIN 46 228/4, max.
1,5 mm²
con terminale, DIN 46228 pt 1, min.
0,25 mm²
con terminale a norma DIN 46 228/1, max.
1,5 mm²
Conduttore innestabile
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      9025740000
    • Stripping length:
      • nominal:
        5 mm
    • Recommended wire-end ferrule:
      9018910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      9025750000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Corrente di dimensionamento, numero minimo di poli (Tu=20 °C)
17,5 A
Corrente di dimensionamento, numero massimo di poli (Tu=20 °C)
17,5 A
Corrente di dimensionamento, numero minimo di poli (Tu=40 °C)
17,5 A
Corrente di dimensionamento, numero massimo di poli (Tu = 40°C)
17,5 A
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
630 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
320 V
Tensione nominale con classe di sovratensione/grado di lordura III/3
250 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
4 kV
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
4 kV
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
4 kV

Märkdata enligt CSA

Intézet (CSA)
CSA 
Tanúsítvány száma (CSA)
200039-1815154 
Tensione nominale (Gruppo B / CSA)
300 V
Tensione nominale (Gruppo D / CSA)
300 V
Corrente nominale (Gruppo B / CSA)
20 A
Névleges áram (D felhasználási csoport / CSA)
10 A
Vezeték keresztmetszet, AWG, min.
AWG 28 
Vezeték keresztmetszet, AWG, max.
AWG 14 
Hivatkozás a tanúsítási értékekre
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Istituto (cURus)
CURUS 
Tanúsítvány száma (cURus)
E60693 
Tensione nominale (Gruppo B / UL 1059)
300 V
정격 전압(사용 그룹 D / UL 1059)
300 V
Corrente nominale (Gruppo B / UL 1059)
15 A
정격 전류(사용 그룹 D / UL 1059)
10 A
와이어 단면적, AWG, 최소
AWG 28 
Sezione di collegamento cavo AWG, max.
AWG 14 
Hivatkozás a tanúsítási értékekre
Specifications are maximum values, details - see approval certificate. 

Packaging

Imballaggio
Box 
Lunghezza VPE
317 mm
Larghezza VPE
212 mm
Altezza VPE
28 mm

Type tests

Test: Durabilità delle siglature
  • Standard:
    DIN IEC 60512-2 section 1 / 05.94
  • Test:
    mark of origin, type identification, pitch, approval marking UL, durability
  • Evaluation:
    available
Test: Sezione bloccabile
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.99
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.08 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.08 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/19
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥5 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U1.5
    • Type of conductor and conductor cross-section:
      H05V-K1.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01