SCS 24VDC P2SIL3ES
SCS 24VDC P2SIL3ES
Wiring diagram
SCS 24VDC P2SIL3ES
DC load limit curve
SCS 24VDC P2SIL3ES
Dimensioned drawing
SCS 24VDC P2SIL3ES
Miscellaneous
Type codes

SCS 24VDC P2SIL3ES

SAFESERIES, Safety relay,24 V DC ±15 %, 24 VDC +15% / -10% during auto-start, 35 mA, 5, SIL 3, DIN EN 61508, EN ISO 13849-1 (PLe)

Produkt ID 1319280000
Download datablad Engineering Support Product Downloads
Tilbehør 19 Anvendte produkter 1
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input (power supply) Starting circuit Monitoring circuit Output (release circuit) Feedback output Safety-related basic specifications General data Insulation coordination Further details of approvals / standards Connection data Classifications Approvals

General ordering data

Version
SAFESERIES, Safety relay,24 V DC ±15 %, 24 VDC +15% / -10% during auto-start, 35 mA, 5, SIL 3, DIN EN 61508, EN ISO 13849-1 (PLe)  
Order No.
1319280000  
Type
SCS 24VDC P2SIL3ES  
GTIN (EAN)
4050118125078  
Qty.
1  Styk

Dimensions and weights

Depth
114,1  mm
Depth (inches)
4,492  inch
Height
119,6  mm
Height (inches)
4,709  inch
Width
22,5  mm
Width (inches)
0,886  inch
Net weight
292  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...55 °C  
Humidity
40 °C / 93 % rel. humidity, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol 119-47-1  
SCIP
332bc555-bc84-431d-ba7a-563be05e80bd  

Input (power supply)

Connection designation
A1  
A2  
C1  
C2  
Rated control voltage
24 V DC ±15 %  
24 VDC +15% / -10% during auto-start  
Current consumption
55 mA (release circuit enabled)  
6 mA (release circuit not enabled)  
Guaranteed current consumption at 24 V DC -10%
35  mA
Inrush current
750 mA / 5 ms (for starting with S33/S34 (start circuit))  
2 A / 20 ms (for starting with A1/A2 (autostart))  
Response time
with bridge via C1/C2: typ. 50 ms  
without bridge via C1/C2: typ. 20 ms  
Status display
LED green: supply  
Yellow LED: signal  
Protective circuit
Reverse polarity protection  
Free-wheeling diode  
Short-circuit detection
Yes, max. 4 s up to disconnection (thermistor)  

Starting circuit

Anschlussbezeichnung
S33  
S34  
S35  
Operating voltage
22 V DC, from internal power supply  
Function
falling edge (button via S33/S34)  
rising edge (permanent bridge via S33/S35)  

Monitoring circuit

Connection designation
S11  
S12  
S21  
S22  
Input
2, each externally bridgeable  
Operating voltage
22 V DC, from internal power supply  

Output (release circuit)

Connection designation
13  
14  
23  
24  
Contact design
2 NO positively-driven (EN 50205 type B)  
Contact base material
AgSnO  
Switching voltage AC, max.
250  V
Max. permissible switching current
5  A
Max. switching current, external fuse
5 A  
Max. switching capacity
1250 VA  
External back-up fuse
5 A time-lag  
Turn-on time
55 ms (C1/C2 bridged, switched via A1/A2)  
30 ms (opening/closing of monitoring circuit)  
Turn-off time
55 ms (C1/C2 bridged, switched via A1/A2)  
15 ms (opening/closing of monitoring circuit)  
Min. switching capacity
10 mA @ 12 V  

Feedback output

Connection designation
31  
32  
Contact design
1 NC positively-driven (EN 50205 type B)  
Switching voltage AC, max.
250  V
Max. switching current.
1 A  

Safety-related basic specifications

Device type
A  
Tproof
12  a
Hardware fault tolerance (HFT)
1  
Safety category
SIL 3  
Safety standard
DIN EN 61508  
EN ISO 13849-1 (PLe)  

General data

Operating altitude
≤ 2000 m  
above sea level  
Rail
TS 35  
Colour
black  
yellow  

Insulation coordination

Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 5.5 mm  
Dielectric strength for control side - load side
4 kVeff / 1 min  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
6 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Standards
EN 61000  
EN 61326-3-2  
EN ISO 13849-1 (PLe)  
Equipment for furnaces
EN 50156  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
8  mm
Tightening torque, min.
0,4  Nm
Tightening torque, max.
0,6  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,13  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 12  
Wire cross-section, solid, min.
0,2  mm²
Wire cross-section, solid, max.
2,5  mm²
Wire connection cross section, finely stranded, min.
0,2  mm²
Wire connection cross section, finely stranded, max.
2,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,2  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,2  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5  mm²
Blade size
size PH0  

Classifications

ETIM 6.0
EC001449  
ETIM 7.0
EC001449  
ETIM 8.0
EC001449  
ETIM 9.0
EC001449  
ETIM 10.0
EC001449  
ECLASS 9.0
27-37-18-19  
ECLASS 9.1
27-37-18-19  
ECLASS 10.0
27-37-18-19  
ECLASS 11.0
27-37-18-19  
ECLASS 12.0
27-37-18-19  
ECLASS 13.0
27-37-18-19  
ECLASS 14.0
27-37-18-19  
ECLASS 15.0
27-37-18-19  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319238/-S800/-T1z1mm-S80)  
ROHS
Conform