VPU AC II+III 2 440/20 S
VPU AC II+III 2 440/20 S
Electric symbol
Schematic circuit diagram

VPU AC II+III 2 440/20 S

Surge voltage arrester, Low voltage, Single-phase, TN-S

Item No. 2908440000
Open in Configurator
Download data sheet Engineering Support Product Downloads
Accessories 2 Related products 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

Godkännanden
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Версия
Surge voltage arrester, Low voltage, Single-phase, TN-S 
Nr zam.
2908440000 
Type
VPU AC II+III 2 440/20 S 
GTIN (EAN)
4099986190641 
Qty.
1 items

Dimensions and weights

Глубина
70 mm
Depth (inches)
2,756 inch
Высота
97 mm
Height (inches)
3,819 inch
Bredd
18 mm
Width (inches)
0,709 inch
Net weight
162,5 g

Temperatures

Omgivningstemperatur
-40 °C…85 °C 
Рабочая температура
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS 合规状态
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 

General data

Colour
grey 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Anforderungsklasse nach EN 61643-11
T2 
T3 
Clase de requisitos según IEC 61643-11
Type II 
Type III 
Combined pulse UOC
6 kV
Courant de décharge (type III)
3 kA
Courant de fuite In (8/20 µs) fil-PE
10 kA 
Energy coordination (≤10 m)
Type II 
Type III 
Frequency range, max.
60 Hz
Frequenzbereich, min.
50 Hz
Levezetőáram Imax. (8/20µs) vezeték-PE
20 kA 
Livello di protezione Up con IN (L/N-PE)
≤ 1.7 kV 
Low voltage network
Single-phase 
TN-S 
Max. continuous voltage, Uc (AC)
440 V 
Normen
IEC 61643-11 
EN 61643-11 
Ochranné pojistky
No Fuse neccessary ≤100 A gG 
Počet pólů
2 
Rated voltage (AC)
230 V
Response time / fallback time
≤ 25 ns 
Short-circuit current rating ISCCR
25 kA
Signalling contact
No 
Temporary surge voltage (over-voltage) - TOV
440 V
Voltage type
AC 
Wbudowane zabezpieczenie wstępne
No 
Protection level Up at IN (L-PE) (type III)
≤1 kV 

Connection data

Conductor connection cross-section PE, solid, max.
35 mm²
Conductor connection cross-section PE, stranded, max.
35 mm²
Stripping length
13 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
13 mm
Tightening torque, min.
1,2 Nm
Tightening torque, max.
2 Nm
Clamping range, rated connection
10 mm²
Clamping range, min.
2,5 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
2,5 mm²
Wire cross-section, solid, max.
10 mm²
Wire connection cross section, finely stranded, min.
2,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
2,5 mm²
Connection cross-section, stranded, max.
10 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
2 
Protection degree
IP20 in installed state 
Colour
grey 

Guarantee

Time interval
5 years 

Important note

产品信息
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02