PVN DC 2I 1O 1MPP RD EVO 11

• Current per string, max.:

  30 A

• Rated current:

  37.5 A

• Wire connection:

  • Type of connection:

    Stäubli MC4-Evo 2 connector

  • Wire cross-section, min.:

    2.5 mm²

  • Wire cross-section, max.:

    6 mm²

• Wire connection:

  • Type of connection:

    Stäubli MC4-Evo 2 connector

  • Wire cross-section, min.:

    2.5 mm²

  • Wire cross-section, max.:

    6 mm²

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Screw terminal connectors

  • Flexible, max. H05(07) V-K:

    1.5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1.5 mm²

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Screw terminal connectors

  • Flexible, max. H05(07) V-K:

    1.5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1.5 mm²

Automatic ON and OFF switching fireman switch for the connection to 1 MPP tracker in the inverter.
Suitable for remote disconnection of the DC side by the fire department.
Max. string voltage Uoc: 1100V

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
1 output, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

DC fireman switch:
Switching off by undervoltage tripping.
Automatic reconnection after the control voltage (230 V AC) is applied again.
With signal contact.

Connection of the fireman switch control line 230 VAC via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm².
Connection of the signal contact 24 VDC via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm².
Protection class: IP65.
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 370x200x135mm.

Approval according to low voltage switchgear IEC 61439-1:2011 and EN 61439-2:2011