PVN DC 3IF 3O 1MPP SW SPD1R CG 10
PVN DC 3IF 3O 1MPP SW SPD1R CG 10
PCB design
PVN DC 3IF 3O 1MPP SW SPD1R CG 10
PVN DC 3IF 3O 1MPP SW SPD1R CG 10
PVN DC 3IF 3O 1MPP SW SPD1R CG 10

PVN DC 3IF 3O 1MPP SW SPD1R CG 10

Photovoltaïque, Boîtier de combinaison, PV Next, 1000 V, 1 MPP, 3 entrées / 3 sorties par MPP, Avec porte-fusible, Protection surtension I / II, Interrupteur-sectionneur, Presse-étoupe

Ürün No. 2683050000
Veri sayfasını indir Ürün İndirmleri Mühendislik desteği
Aksesuarlar 20 aksesuarıdır 12 Yedek parçalar 2 İlgili ürünler 22
Homologaciones Informations générales de commande Dimensiones y pesos Temperature Conformité environnementale du produit DC string monitoring Included in delivery Guarantee Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Important note 분류 Ajánlati specifikációs lapok

Homologaciones

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

Informations générales de commande

Version
Photovoltaïque, Boîtier de combinaison, PV Next, 1000 V, 1 MPP, 3 entrées / 3 sorties par MPP, Avec porte-fusible, Protection surtension I / II, Interrupteur-sectionneur, Presse-étoupe 
Order No.
2683050000 
Type
PVN DC 3IF 3O 1MPP SW SPD1R CG 10 
GTIN (EAN)
4050118699869 
Кол.
1 Штука

Dimensiones y pesos

Depth
172 mm
Depth (inches)
6,772 inch
Mélység kiegészítő komponensekkel
215 mm
Height
335 mm
높이 (인치)
13,189 inch
Width
300 mm
Szerokość (cale)
11,811 inch
Масса нетто
4.130,72 g

Temperature

Ambient temperature
-40 °C…45 °C 
Влажность
5–90 % (без образования конденсата) 

Conformité environnementale du produit

RoHS Compliance Status
Conforme 
REACH SVHC
Lead 7439-92-1 
SCIP
bdab5698-6a20-4370-8e28-8810d882d01a 

DC string monitoring

Monitoring function
Non monitored 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4
  • Article:
    Sealing plug
  • Quantity:
    5

Guarantee

Time interval
5 years 

Electrical characteristics

Current per Maximum Power Point, max.
45 A
Rated DC current per connection
  • Current per string, max.:
    45 A
Rated DC voltage
1.000 V
Rated short-term current resistance
  • Rated current:
    56,25 A

Enclosure

Connection type string
Internal terminal (with cable gland feed-through) 
Cover
with cover 
removeable 
Enclosure attachment
Via mounting foots 
Impact resistance
IK08 in accordance with IEC 62208 
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Protection class
II 
Type of mounting
Montáž na stěnu 
4 šrouby 

General data

Installation location
Protected outdoor area (Land and Sea) 
Protection degree
IP65 
Standards
EN 61643-31 
IEC 61439-2 ed 3.0 

Inputs

Amount of maximum power points (MPP)
1 
Cartridge fuse
10 x 38 mm 
DC Input + & -
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
  • Cable entry:
    • Number of cable entries:
      3
    • Cable diameter, min.:
      5 mm
    • Cable diameter, max.:
      10 mm
    • Cable gland:
      M 25
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      1
    • Cable diameter, min.:
      5 mm
    • Cable diameter, max.:
      10 mm
    • Cable gland:
      M 16
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Empty fuse holder 
Fuse-link standard
IEC 60269-1 
IEC 60269-6 
gPV (EN 60269-6) 
Fused poles of string
+/- 
Fuses
Yes 
Max. number of DC inputs
per Maximum Power Point 3 inputs connected in parallel 
Number of conduit inlets
4 
Number of string inputs per MPP
≤ 3 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
    • Cable diameter, min.:
      5 mm
    • Cable diameter, max.:
      10 mm
    • Cable gland:
      M 16
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
Number of inputs
3 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Max. number of DC outputs
per Maximum Power Point 3 outputs connected in parallel 

Surge protection DC side

Discharge current In (8/20 µs)
20 kA 
Discharge current, max. (8/20 µs)
40 kA
Lightning test current Iimp (10/350 µs)
6.25 kA 
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1.100 V
Protection level Up (+/- , -/PE , +/PE)
≤ 3.8 kV 
Protection level Up (+/-)
≤ 3.8 kV 
Protection level Up (+/PE)
≤ 3.8 kV 
Protection level Up (-/PE)
≤ 3.8 kV 
PV system voltage, max. Ucpv
1.000 V
Requirements class
Type I/II 
Short-circuit curent ISCPV
11.000 A
Standards
EN 61643-31 
IEC 61439-2 ed 3.0 
Standby power consumption PC
<0.2 W 
Surge protection DC side
1000 V type I + II with remote contact 
Total discharge current Itotal ( 8/20µs)
50 kA
Total discharge current Itotal (10/350µs)
12,5 kA

DC load break switch

Motor drive available
No 
Nominal current
45 A
Nominal voltage
1.000 V
Number of breaking operation cycles at rated current
300 
Number of contacts as NC contact
0 
Number of contacts as NO contact
4 
Number of operating cycles
10000 
Rated impulse withstand voltage
8 kV 
Rated short-circuit making current
1,4 A
Switch disconnector execution
switch in cover 
Switching disconnector capacity
DC-PV1 
IEC 60947-3 
Voltage type
DC 

Important note

Product information
The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase Fuses are not included 

분류

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Ajánlati specifikációs lapok

Hosszú specifikáció

Combiner box for inverters with 1 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to EN 51543-32.

MPP1:
3 inputs, connection via M25 cable gland with 3x7mm Ø cable entry. PUSH IN connection / 2.5 - 6mm² single-wire, multi-wire, with/without ferrule.
3 outputs, connection via M25 cable gland with 3x7mm Ø cable entry. PUSH IN connection / 2.5 - 6mm² single-wire, multi-wire, with/without ferrule.

Max. string voltage Uoc: 1000V
1 class/type I + II combined arrester with signal contact
Fuse holders for inputs and outputs (fuses 10x38 to be ordered separately)
With load break switch for safe separation of the string lines
Connection of the signal contact via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm²
Connection of the functional earth via cable glands (8-12mmØ) Conductor cross-section: 16-25mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 330x302x214 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1:2011 and EN 61439-2:2011