text.skipToContent text.skipToNavigation

ACT20P-CMT-60-RC-P — Similar to illustration

Lataa tietosivu Samankaltaiset tuotteet

ACT20P-CMT-60-RC-P

Current-measuring transducer, Limit value monitoring, Input : 0…40/50/60 A, Relay output, Current-carrying cable in feed-through hole

Tuotteen tunnus 1510280000

Ominaisuudet

General ordering data

Version	Current-measuring transducer, Limit value monitoring, Input : 0…40/50/60 A, Relay output, Current-carrying cable in feed-through hole
Order No.	1510280000
Type	ACT20P-CMT-60-RC-P
GTIN (EAN)	4050118319484
Qty.	1 items

Dimensions and weights

Depth	114 mm
Depth (inches)	4,488 inch
Height	127,1 mm
Height (inches)	5,004 inch
Width	22,8 mm
Width (inches)	0,898 inch
Net weight	158 g

Temperatures

Storage temperature	-40 °C...85 °C
Operating temperature	-25 °C...60 °C
Humidity	5...95 %, no condensation

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	6c, 7a, 7cI
REACH SVHC	Lead 7439-92-1
SCIP	2f6dd957-421a-46db-a0c2-cf1609156924

Input

Input frequency	AC: 15…700 Hz (true root mean square)
Input measurement range	configurable 0…40/50/60 A AC or DC max. peak current 10 × I_Input (1 s) For DC current measurement (AA): Current direction display at the output (-/+ analog value)
Input signal	Current-carrying cable in feed-through hole
Number of inputs	1
Overload behaviour	Max. peak current: 10 × IInput for 1s

Output (digital)

Alarm function	Surge current Under-current Alarm delay: 0…10 s Hysteresis 5% / 10%
Continuous current	2 × I Input
Max. switching voltage, AC	250 V
Max. switching voltage, DC	24 V
Number of digital outputs	1
Rated switching current	6 A
Switching thresholds	2...105% of measurement range
Type	Relay, 1 CO contact normal / inverse adjustment

General data

Accuracy	<0.75 % FSR
Configuration	DIP switch and potentiometer
Galvanic isolation	3-way isolator between input ⁄ output ⁄ supply
Power consumption, max.	2,2 W
Protection degree	IP20
Rail	TS 35
Step response time	≤ 300 ms (RMS) ≤ 60 ms (AA)
Temperature coefficient	0.01%/K @ 0...40 A 0.10%/K @ 40...55 A 0.30%/K @ 55...60 A
Voltage supply	16,8 V…31,2 V

Insulation coordination

EMC standards	EN 61326-1
Galvanic isolation	3-way isolator between input ⁄ output ⁄ supply
Impulse withstand voltage	6.4 kV (1.2/50 µs)
Insulation voltage	4 kV_eff / 1 min.
Rated voltage	300 V AC_rms
Surge voltage category	III
Test voltage	4 kV

Connection data

Type of connection	PUSH IN
Tightening torque, min.	0,4 Nm
Tightening torque, max.	0,6 Nm
Clamping range, rated connection	2,5 mm²
Clamping range, min.	0,5 mm²
Clamping range, max.	2,5 mm²
Wire connection cross section AWG, min.	AWG 26
Wire connection cross section AWG, max.	AWG 14
Wire cross-section, solid, min.	0,2 mm²
Wire cross-section, solid, max.	2,5 mm²
Wire connection cross section, finely stranded, min.	0,2 mm²
Wire connection cross section, finely stranded, max.	2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.	0,2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.	2,5 mm²

Important note

Product information

The ACT20P-CMT-XX-(AO)-RC-P series of devices measure and monitor AC and DC currents of up to 60 A. The real effective value method used allows for precise measurement, even for distorted current curve shapes. The devices feature integrated limit value monitoring with an adjustable switching threshold, delay and hysteresis, as well as a relay output..

Features

Real effective value measurement (True RMS) or arithmetic averaging (AA) measurement and contactless through-hole technology
Limit value monitoring for overcurrent or undercurrent
Relay output by means of the open-circuit / closed-circuit principle
Adjustable trigger delay for filtering current peaks
Operational status and error display on a front panel LED and output signalling according to NE43, NE44, NE107
Galvanic four-way insulation for secure isolation according to IEC/EN 61010-2-201

Downloads

Approval/Certificate/Document of Conformity	[Certification DNV GL](https://mdcop.weidmueller.com/mediadelivery/asset/900_152118) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35553)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_96400)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1510280000)
Software	[DIP switch configuration tool](https://mdcop.weidmueller.com/mediadelivery/asset/900_35389)
User Documentation	[Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_45615)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002475
ETIM 7.0	EC002475
ETIM 8.0	EC002475
ETIM 9.0	EC002475
ECLASS 9.0	27-21-01-23
ECLASS 9.1	27-21-01-23
ECLASS 10.0	27-21-01-23
ECLASS 11.0	27-21-01-23
ECLASS 12.0	27-21-01-23
ECLASS 13.0	27-21-01-23
ECLASS 14.0	27-21-01-23

Approvals

Approvals	![CE](/picture/CE.gif) ![CULUS](/picture/CULUS.gif)
Approvals	CULUS;
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate no. (cULus)	E141197

Lisävarusteet

MarkersDevice markersMultiCardESGESG 6.6/... BHZBlank

ESG 6.6/20 BHZ 5.00/04 5C

Tuotteen tunnus:

1082540000

VPE:

200 items

ESG, Device markers x 20 mm, PA 66, Colour: white

Tuotesivu Lataukset

MarkersDevice markersMultiCardESGESG 8/13.5/43.3 SAI AUBlank

ESG 8/13.5/43.3 SAI AU 5C

Tuotteen tunnus:

1912130000

VPE:

5 items

ESG, Device markers x 13.5 mm, PA 66, Colour: Transparent

Tuotesivu Lataukset

Yksittäiset osat

Electronics HousingsModular electronics housingsConnection system - CH20MPCB connectors four pole - CH20M22, CH20M45, CH20M67Female plugs - PUSH IN spring connection

BHF 5.00/04/180LH BK/BK

Tuotteen tunnus:

1497500000

VPE:

78 items

PCB plug-in connector, female plug, 5.00 mm, Number of poles: 4, 180°, PUSH IN with actuator, Box

Tuotesivu Lataukset

Connectivity

Electronics

Automation & Software

Workplace & Accessories

Assembly