HDC HP 550 M 150
HDC HP 550 M 150
Derating curve

HDC HP 550 M 150

HDC insert, Male, 3600 V, Crimp connection, Installation size: 550

Produkt ID 1119110000
Download datablad Engineering-support Produktdownloads
Tilbehør 1 Er tilbehør til 2 Anvendte produkter 16
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Power contact Version Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
HDC insert, Male, 3600 V, Crimp connection, Installation size: 550 
Order No.
1119110000 
Type
HDC HP 550 M 150 
GTIN (EAN)
4032248900367 
Qty.
1 Styk

Dimensions and weights

Length
91 mm
Length (inches)
3,583 inch
Diameter
43 mm
Net weight
211 g

Temperatures

Limit temperature
-50 °C ... 120 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
6eabd5ae-2d6b-409e-8bdf-87c27ee10e40 

General data

Basic material
Copper alloy 
BG
550 
Brennbarkeitsklasse nach UL 94
V-0 
Color
black 
Cykle wpinania
≥ 500 
Durchgangswiderstand
≤0.1 mΩ 
Installation size
550 
Insulation resistance
1010 Ω 
Matériau isolant
Polyamide with fibre optic 
Plugging cycles, silver
≥ 500 
Pollution severity
PD 2 (PD 3) 
Rated current acc. to DIN EN 61984 (ambient temperature=20°C)
405 A
Rated impulse voltage (DIN EN 61984)
15 kV
Rated voltage (DIN EN 61984)
3.600 V
Series
HighPower 
Superficie
Silver passivated 
Typ
Male 
Type of connection
Crimp connection 
Vezeték-keresztmetszet
150 mm²

Power contact

Rated impulse voltage (DIN EN 61984), power contact
15 kV
Stripping length, performance contact
30 mm
Type of connection, power contact
Crimp connection 

Version

Basic material
Copper alloy 
BG
550 
Conductor cross-section, max.
150 mm²
Conductor cross-section, min.
150 mm²
Installation size
550 
Stripping length, rated connection
30 mm
Surface finish
Silver passivated 
Type of connection
Crimp connection 
Volume resistance
≤0.1 mΩ 

Important note

Product information
Depending on the intended operation, internally generated voltages can superimpose the working voltage and contain corresponding peaks. It is imperative to ensure that these peak voltages do not exceed the rated voltage. For applications outside of this specification, please contact us. The rated voltage of 3.6 kV must be reduced by 20% at operating temperatures above 100°C. 

Classifications

ETIM 8.0
EC000796 
ETIM 9.0
EC000796 
ETIM 10.0
EC000796 
ECLASS 14.0
27-44-02-04 
ECLASS 15.0
27-44-02-04