CRIKIT P 110VDC 1CO L/D UL

CRIKIT P 110VDC 1CO L/D UL

, Number of contacts: 1, CO contact AgNi, Rated control voltage: 110 V DC, Continuous current: 16 A, PUSH IN, Test button available: No

Tuotteen tunnus 8000158571
Lataa tietosivu Product Downloads
Samankaltaiset tuotteet 112
General ordering data Dimensions and weights Teploty Control side Load side General data Coordinación de aislamiento Connection data Classifications

General ordering data

Version
, Number of contacts: 1, CO contact AgNi, Rated control voltage: 110 V DC, Continuous current: 16 A, PUSH IN, Test button available: No 
Order No.
8000158571 
Type
CRIKIT P 110VDC 1CO L/D UL 

Dimensions and weights

Depth
72,5 mm
Depth (inches)
2,854 inch
Height
97 mm
Height (inches)
3,819 inch
Width
15,9 mm
Width (inches)
0,626 inch

Teploty

Ambient temperature
-20 °C…70 °C 

Control side

Rated control voltage
110 V DC 
Courant nominal DC
23,5 mA 
Power rating
565 mW 
Coil resistance
1440 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 
Coil voltage of the replacement relay deviating from the rated control voltage
No 
Coil voltage of the replacement relay
24 V DC 

Load side

Rated switching voltage
250 V AC 
Continuous current
16 A @ 1CO with bridged output wire connections; 12 A; @ 1CO without bridged output wire connections 
Max. switching frequency at rated load
0,1 Hz
Max. kapcsolási feszültség, AC
250 V
Max. switching voltage, DC
250 V
Мин. коммутационная способность
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
4000 
DC switching capacity (resistive), max.
384 W @ 24 V 
Switch-on delay
≤ 12 ms 
Switch-off delay
≤ 6 ms 
Contact type
1 CO contact (AgNi) 
Mechanical service life
3 x 107 switching cycles 

General data

Operating altitude
≤ 2000 m 
above sea level 
Mounting rail
TS 35 
Test button available
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Socket
  • UL94 flammability rating:
    V-0
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2

Coordinación de aislamiento

Categoría de sobretensión
II 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
8 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
1,5 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 20 
Wire cross-section, solid, max. (AWG)
AWG 16 
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01