CRIKIT S 48VDC 1CO L/D UL

CRIKIT S 48VDC 1CO L/D UL

, Number of contacts: 1, CO contact AgNi, Rated control voltage: 48 V DC, Continuous current: 16 A, PUSH IN, Screw connection, Test button available: No

Ürün No. 8000158748
Veri sayfasını indir Product Downloads
İlgili ürünler 112
General ordering data Dimensions and weights Temperaturas Control side Lado de carga General data Koordynacja izolacji Connection data Clasificaciones

General ordering data

Verze
, Number of contacts: 1, CO contact AgNi, Rated control voltage: 48 V DC, Continuous current: 16 A, PUSH IN, Screw connection, Test button available: No 
Order No.
8000158748 
Type
CRIKIT S 48VDC 1CO L/D UL 

Dimensions and weights

Depth
72,5 mm
Profundidad (pulgadas)
2,854 inch
Výška
97 mm
Altura (pulgadas)
3,819 inch
Width
15,9 mm
Width (inches)
0,626 inch

Temperaturas

Okolní teplota
-20 °C…70 °C 

Control side

Rated control voltage
48 V DC 
Rated current DC
23.5 mA 
Power rating
565 mW 
Coil resistance
1440 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 
Coil voltage of the replacement relay deviating from the rated control voltage
No 
Coil voltage of the replacement relay
24 V DC 

Lado de carga

Rated switching voltage
250 V AC 
Continuous current
16 A @ 1CO with bridged output wire connections; 12 A; @ 1CO without bridged output wire connections 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
4000 
DC switching capacity (resistive), max.
384 W @ 24 V 
Switch-on delay
≤ 12 ms 
Switch-off delay
≤ 6 ms 
Contact type
1 CO contact (AgNi) 
Mechanical service life
3 x 107 switching cycles 

General data

Operating altitude
≤ 2000 m 
above sea level 
Mounting rail
TS 35 
Test button available
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Socket
  • UL94 flammability rating:
    V-0
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2

Koordynacja izolacji

Kategoria przepięciowa
II 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Wire connection method
PUSH IN 
Screw connection 
Stripping length, rated connection
8 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
1,5 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 20 
Wire cross-section, solid, max. (AWG)
AWG 16 
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.6 x 3.5 mm 

Clasificaciones

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01