S2L 3.50/04/180F 3.5SN BK BX
Product image
S2L 3.50/04/180F 3.5SN BK BX
Product image
S2L 3.50/04/180F 3.5SN BK BX
Dimensional drawing

S2L 3.50/04/180F 3.5SN BK BX

Tämä tuote ei ole enää saatavana.

Штекерный соединитель печатной платы, Штырьковый соединитель, Розетка, Соединение THT под пайку, 3.50 mm, Количество полюсов: 4, 180°, Длина штифта для припайки (l): 3.5 mm, луженые, черный, Ящик

Tuotteen tunnus 2941830000
Lataa tietosivu Tuotelataukset
Samankaltaiset tuotteet 39
Approvals Основные данные для заказа Dimensions et poids Экологическое соответствие изделия System specifications Anyagjellemzők Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Imballaggio Important note Classifications

Approvals

ROHS
Conform 

Основные данные для заказа

Version
Штекерный соединитель печатной платы, Штырьковый соединитель, Розетка, Соединение THT под пайку, 3.50 mm, Количество полюсов: 4, 180°, Длина штифта для припайки (l): 3.5 mm, луженые, черный, Ящик 
Order No.
2941830000 
Type
S2L 3.50/04/180F 3.5SN BK BX 
GTIN (EAN)
4099986712133 
Product data
IEC: 160 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 
Delivery status
This article will no longer be available in the future. 
Last order date
/Date(1793401200000)/ 

Dimensions et poids

Depth
14,2 mm
Depth (inches)
0,559 inch
Height
14 mm
Height (inches)
0,551 inch
Height of lowest version
14,2 mm
Width
14 mm
Width (inches)
0,551 inch
Net weight
1,982 g

Экологическое соответствие изделия

RoHS Compliance Status
Соответствует без исключения 
REACH SVHC
No SVHC above 0.1 wt% 

System specifications

Product family
OMNIMATE Signal - series B2L/S2L 3.50 - 2-row 
Mounting onto the PCB
THT solder connection 
Pitch in mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
Outgoing elbow
180° 
Number of poles
4 
Number of solder pins per pole
1 
Solder pin length (l)
3,5 mm
Rozměry pájecích pinů
d = 1.0 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Can be coded
Yes 
Plugging cycles
25 
Plugging force/pole, max.
5 N
Pulling force/pole, max.
4 N
Tightening torque
  • Torque type:
    Mounting screw, PCB
  • Usage information:
    • Tightening torque:
      • min.:
        0,1 Nm
      • max.:
        0,15 Nm
    • Recommended screw:
      • Part number:
        1610740000

Anyagjellemzők

Insulating material
PBT GF 
Colour
black 
Colour chart (similar)
RAL 9011 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
100 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
10 A
Rated current, max. number of poles (Tu=20°C)
10 A
Rated current, min. number of poles (Tu=40°C)
9 A
Rated current, max. number of poles (Tu=40°C)
8,5 A
Rated voltage for surge voltage class / pollution degree II/2
160 V
Rated voltage for surge voltage class / pollution degree III/2
125 V
Rated voltage for surge voltage class / pollution degree III/3
80 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
1,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
1,5 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 77 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
150 V
Rated current (Use group B / CSA)
5 A

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
150 V
Rated current (Use group B / UL 1059)
10 A

Imballaggio

Packaging
박스 
VPE length
352 mm
VPE width
139 mm
VPE height
26 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • For additional mechanical support for male connectors with screw flange (…F), we recommend an additional cable gland with fastening screws (sheet metal screw ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C – see Accessories). Cable gland only permitted before soldering.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01