BLZ 7.62IT/04/180MF3 SN BK BX
BLZ 7.62IT/04/180MF3 SN BK BX
Product image
BLZ 7.62IT/04/180MF3 SN BK BX
Product image
BLZ 7.62IT/04/180MF3 SN BK BX
Dimensional drawing
Similar to illustration
BLZ 7.62IT/04/180MF3 SN BK BX
Graph
BLZ 7.62IT/04/180MF3 SN BK BX
Graph

BLZ 7.62IT/04/180MF3 SN BK BX

PCB plug-in connector, female plug, 7.62 mm, Number of poles: 4, 180°, Clamping yoke connection, Clamping range, max. : 4 mm², Box

Product ID 2629750000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 3 Verwante producten 11
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, female plug, 7.62 mm, Number of poles: 4, 180°, Clamping yoke connection, Clamping range, max. : 4 mm², Box 
Order No.
2629750000 
类型
BLZ 7.62IT/04/180MF3 SN BK BX 
GTIN (EAN)
4050118633382 
Qty.
40 items
Product data
IEC: 630 V / 29 A / 0.08 - 4 mm²
UL: 600 V / 20 A / AWG 20 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
23,4 mm
Depth (inches)
0,921 inch
Height
21,2 mm
Height (inches)
0,835 inch
Width
38,1 mm
Width (inches)
1,5 inch
Net weight
9,244 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 
Product Carbon Footprint
  • Cradle to gate:
    0.199 kg CO2 eq.

System Parameters

Product family
OMNIMATE Power - series BL/SL 7.62IT 
Type of connection
Field connection 
Wire connection method
Clamping yoke connection 
ピッチ (mm) (P)
7,62 mm
ピッチ (インチ) (P)
0,3 "
導体取り出し方向
180° 
극 수
4 
L1(mm)
30,48 mm
L1 in inches
1,2 "
Number of rows
1 
Pin series quantity
1 
Rated cross-section
2,5 mm²
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 
when fully mounted 
Volume resistance
5.00 mΩ 
Can be coded
Yes 
Stripping length
7 mm
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping screw
M 2.5 
Screwdriver blade standard
DIN 5264 
Plugging cycles
25 
Plugging force/pole, max.
9,5 N
Pulling force/pole, max.
8,5 N

Material data

Insulating material
PBT 
Colour
black 
Colour chart (similar)
RAL 9011 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
Insulation resistance
≥ 10⁸ Ω 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Layer structure of plug contact
4...8 µm Sn hot-dip tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0,08 mm²
Clamping range, max.
4 mm²
Wire connection cross section AWG, min.
AWG 28 
przekrój przyłączeniowy przewodu AWG, maks.
AWG 12 
Solid, min. H05(07) V-U
0,08 mm²
Solid, max. H05(07) V-U
4 mm²
Flexible, min. H05(07) V-K
0,08 mm²
Flexible, max. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,2 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2,5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,2 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.8 mm x 2.4 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • nominal:
      0,25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025760000
  • Cross-section for conductor connection:
    • nominal:
      0,34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025770000
  • Cross-section for conductor connection:
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
  • Cross-section for conductor connection:
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0373000000
Reference text
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current at min. number of poles (Tu = 20 °C)
29 A
Rated current, max. number of poles (Tu=20°C)
26,5 A
Rated current, min. number of poles (Tu=40°C)
25 A
Rated current at max. number of poles (Tu = 40 °C)
23 A
Rated voltage for surge voltage class (pollution degree II/2)
630 V
Rated voltage for surge voltage class (pollution degree III/2)
500 V
Rated voltage for surge voltage class (pollution degree III/3)
400 V
Rated impulse voltage for surge voltage class (pollution degree II/2)
4 kV
Rated impulse voltage for surge voltage class (pollution degree III/2)
6 kV
Rated impulse voltage for surge voltage class (contamination degree III/3)
6 kV
Short-time withstand current resistance
3 x 1s with 180 A 
Clearance, min.
9,8 mm
Creepage distance, min.
11,3 mm

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
600 V
Jmenovité napětí (aplikační skupina C / CSA)
600 V
Tensione nominale (Gruppo D / CSA)
600 V
Corrente nominale (Gruppo B / CSA)
20 A
정격 전류(사용 그룹 C / CSA)
20 A
정격 전류(사용 그룹 D / CSA)
5 A
Wire cross-section, AWG, min.
AWG 20 
Leiteranschlussquerschnitt AWG, max.
AWG 12 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated voltage (Use group D / UL 1059)
600 V
Rated current (Use group B / UL 1059)
20 A
Rated current (Use group C / UL 1059)
20 A
Rated current (Use group D / UL 1059)
5 A
Wire cross-section, AWG, min.
AWG 20 
Wire cross-section, AWG, max.
AWG 12 

Packing

パッケージ
Box 
Longueur VPE
348 mm
VPE szélesség
135 mm
Výška VPE
31 mm

Type tests

Test : durabilité des marquages
  • Standard:
    DIN EN 61984 section 7.3.2 / 09.02 taking pattern from DIN EN 60068-2-70 / 07.96
  • Test:
    mark of origin, type identification, pitch, type of material, date clock
  • Evaluation:
    available
  • Test:
    durability
  • Evaluation:
    passed
Teszt: Helytelen illesztés (nem felcserélhetők)
  • Standard:
    DIN EN 61984 section 6.3 and 6.9.1 / 09.02, DIN EN 60512-13-5 / 11.06
  • Test:
    180° turned with coding elements
  • Evaluation:
    passed
  • Test:
    180° turned without coding elements
  • Evaluation:
    passed
Test: Sezione bloccabile
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      AWG 12/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed
  • Requirement:
    0.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U4.0
    • Type of conductor and conductor cross-section:
      H07V-K4.0
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥5 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
    • Type of conductor and conductor cross-section:
      H07V-K4.0
  • Evaluation:
    passed
  • Requirement:
    ≥60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U4.0
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02