HDC HP 250 M 50 PE
HDC HP 250 M 50 PE
HDC HP 250 M 50 PE
HDC HP 250 M 50 PE

HDC HP 250 M 50 PE

HDC insert, Male, Crimp connection, Installation size: 250

Product ID 1220850000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 5 Verwante producten 13
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Connection data PE Power contact Version Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
HDC insert, Male, Crimp connection, Installation size: 250 
Order No.
1220850000 
Type
HDC HP 250 M 50 PE 
GTIN (EAN)
4050118003918 
Qty.
1 items

Dimensions and weights

Length
82,6 mm
Length (inches)
3,252 inch
Diameter
32 mm
Net weight
126,41 g

Temperatures

Limit temperature
-50 °C ... 120 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
6eabd5ae-2d6b-409e-8bdf-87c27ee10e40 

General data

Basic material
Copper alloy 
BG
250 
Colour
black 
Conductor cross-section
50 mm²
Installation size
250 
Insulating material
PA GF 
Insulation resistance
1010 Ω 
Operating voltage, max. (total temperature=60°C)
2.300 V
Plugging cycles
≥ 500 
Plugging cycles, silver
≥ 500 
Pollution severity
PD 2 (PD 3) 
Provedení povrchu
Silver passivated 
Rated impulse voltage (DIN EN 61984)
15 kV
Series
HighPower 
Typ
Male 
Type of connection
Crimp connection 
UL 94 flammability rating
V-0 
Volume resistance
≤0.1 mΩ 

Connection data PE

Connection type PE
Crimp connection 

Power contact

Avisoleringslängd effektkontakt
24 mm
Rated impulse voltage (DIN EN 61984), power contact
15 kV

Version

BG
250 
Conductor cross-section, max.
50 mm²
Materiał podstawowy
Copper alloy 
Powierzchnia
Silver passivated 
Resistencia de paso
≤0.1 mΩ 
Stripping length, rated connection
24 mm
Tamaño de instalación
250 
Type of connection
Crimp connection 
Vezeték-keresztmetszet, min.
50 mm²

Important note

Product information
Depending on the intended operation, internally generated voltages can superimpose the working voltage and contain corresponding peaks. It is imperative to ensure that these peak voltages do not exceed the rated voltage. For applications outside of this specification, please contact us. The rated voltage of 3.0 kV must be reduced by 20% at operating temperatures above 110°C. 

Classifications

ETIM 8.0
EC000796 
ETIM 9.0
EC000796 
ETIM 10.0
EC000796 
ECLASS 14.0
27-44-02-04 
ECLASS 15.0
27-44-02-04