text.skipToContent text.skipToNavigation

LM APL 5.08/03/90 3.5SN OR BX

LM APL 5.08/03/90 3.5SN OR BX

LM APL 5.08/03/90 3.5SN OR BX — Graph

Derating curve valid for 5.00 & 5.08 pitch

LM APL 5.08/03/90 3.5SN OR BX

LM APL 5.08/03/90 3.5SN OR BX

LM APL 5.08/03/90 3.5SN OR BX

LM APL 5.08/03/90 3.5SN OR BX

LM APL 5.08/03/90 3.5SN OR BX

Gegevensblad downloaden Verwante producten

LM APL 5.08/03/90 3.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 3, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box

Product ID 2873500000

Eigenschappen

General ordering data

Version	Printed circuit board terminals, 5.08 mm, Number of poles: 3, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box
Order No.	2873500000
Type	LM APL 5.08/03/90 3.5SN OR BX
GTIN (EAN)	4064675644538
Qty.	500 items
Product data	IEC: 630 V / 17.5 A / 0.2 - 2.5 mm² UL: 300 V / 15 A / AWG 24 - AWG 14
Packaging	Box

Dimensions and weights

Depth	10 mm
Depth (inches)	0,394 inch
Height	17,3 mm
Height (inches)	0,681 inch
Height of lowest version	13,8 mm
Width	15,79 mm
Width (inches)	0,622 inch
Net weight	3,62 g

Environmental Product Compliance

RoHS Compliance Status	Compliant without exemption
REACH SVHC	No SVHC above 0.1 wt%

System specifications

Mounting onto the PCB	THT solder connection
Number of poles	3
Number of solder pins per pole	1
Pitch in inches (P)	0,2 "
Pitch in mm (P)	5,08 mm
Product family	OMNIMATE Signal - series LM
Protection degree	IP20
Side termination, characteristic	closed side
Solder eyelet hole diameter (D)	1,3 mm
Solder eyelet hole diameter tolerance (D)	+ 0,1 mm
Solder pin dimensions	0.95 x 0.8 mm
Solder pin length (l)	3,5 mm
Soldering process	Manual soldering Wave soldering
Tolerance of solder pin position	± 0.1 mm

Electrical properties

Volume resistance

1.20 mΩ

Insulating material	Wemid (PA)
Colour	orange
Colour chart (similar)	RAL 2000
Insulating material group	I
Comparative Tracking Index (CTI)	≥ 600
UL 94 flammability rating	V-0
Contact material	Cu-alloy
Contact surface	tinned
Coating	1-3 μm Ni 4-6 μm SN
Tinning type	matt
Layer structure of solder connection	1...3 µm Ni / 4...6 µm Sn matt
Storage temperature, min.	-40 °C
Storage temperature, max.	70 °C
Operating temperature, min.	-50 °C
Operating temperature, max.	120 °C

Packaging	Box
VPE length	247 mm
VPE width	173 mm
VPE height	84 mm

Test: Durability of markings	Standard: DIN EN 60512-1-1 / 01.03 Test: mark of origin, type identification, pitch, type of material, approval marking UL, approval marking CSA, durability Evaluation: available
Test: Clampable cross section	Standard: DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02 Conductor type: Type of conductor and conductor cross-section: solid 0.2 mm² Type of conductor and conductor cross-section: stranded 0.2 mm² Type of conductor and conductor cross-section: stranded 1.5 mm² Type of conductor and conductor cross-section: solid 2.5 mm² Type of conductor and conductor cross-section: AWG 24/1 Type of conductor and conductor cross-section: AWG 24/19 Type of conductor and conductor cross-section: AWG 14/1 Type of conductor and conductor cross-section: AWG 14/19 Evaluation: passed
Test for damage to and accidental loosening of conductors	Standard: DIN EN 60999-1 section 9.4 / 12.00 Requirement: 0.2 kg Conductor type: Type of conductor and conductor cross-section: stranded 0.25 mm² Type of conductor and conductor cross-section: AWG 24/1 Type of conductor and conductor cross-section: AWG 24/19 Evaluation: passed Requirement: 0.3 kg Conductor type: Type of conductor and conductor cross-section: solid 0.5 mm² Evaluation: passed Requirement: 0.4 kg Conductor type: Type of conductor and conductor cross-section: stranded 1.5 mm² Evaluation: passed Requirement: 0.7 kg Conductor type: Type of conductor and conductor cross-section: solid 2.5 mm² Type of conductor and conductor cross-section: AWG 14/1 Type of conductor and conductor cross-section: AWG 14/19 Evaluation: passed
Pull-out test	Standard: DIN EN 60999-1 section 9.5 / 12.00 Requirement: ≥10 N Conductor type: Type of conductor and conductor cross-section: stranded 0.25 mm² Type of conductor and conductor cross-section: AWG 24/1 Type of conductor and conductor cross-section: AWG 24/19 Evaluation: passed Requirement: ≥20 N Conductor type: Type of conductor and conductor cross-section: H05V-U0.5 Evaluation: passed Requirement: ≥40 N Conductor type: Type of conductor and conductor cross-section: H07V-K1.5 Evaluation: passed Requirement: ≥50 N Conductor type: Type of conductor and conductor cross-section: H07V-U2.5 Type of conductor and conductor cross-section: AWG 14/1 Type of conductor and conductor cross-section: AWG 14/19 Evaluation: passed

IPC conformity	Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Notes	Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months

Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_300933)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2873500000)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002643
ETIM 7.0	EC002643
ETIM 8.0	EC002643
ETIM 9.0	EC002643
ECLASS 9.0	27-44-04-01
ECLASS 9.1	27-44-04-01
ECLASS 10.0	27-44-04-01
ECLASS 11.0	27-46-01-01
ECLASS 12.0	27-46-01-01
ECLASS 13.0	27-46-01-01
ECLASS 14.0	27-46-01-01

Approvals	![CURUS](/picture/CURUS.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate No. (cURus)	E60693

Toebehoren

PCB Terminals and ConnectorsOMNIMATE Data PCB connectorsEthernet-APL

SH ETH U

SH ETH U

Product ID:

2903230000

VPE:

25 items

Shield clamp, Accessories, Screw flange, Number of poles: 1, zinc plated, Silver grey, Box

Gegevensblad Downloaden

ToolsScrewdriversVDE insulated screwdrivers and setsSlotted screwdriver

SDIS 0.6X3.5X100

SDIS 0.6X3.5X100

Product ID:

2749810000

VPE:

1 items

Screwdriver, Blade width (B): 3.5 mm, Blade length: 100 mm, Blade thickness (A): 0.6 mm

Gegevensblad Downloaden

ToolsScrewdriversUninsulated screwdrivers and setsCrosshead screwdriver Phillips

SDK PH0 X 60

SDK PH0 X 60

Product ID:

2749400000

VPE:

1 items

Screwdriver, Blade width (B): 60 mm, Blade thickness (A):

Gegevensblad Downloaden

ToolsScrewdriversUninsulated screwdrivers and setsSlotted screwdriver

SDS 0.6X3.5X100

SDS 0.6X3.5X100

Product ID:

2749340000

VPE:

1 items

Screwdriver, Blade width (B): 3.5 mm, Blade length: 100 mm, Blade thickness (A): 0.6 mm

Gegevensblad Downloaden