PVC DC 2I 1O 2MPP RD SPD1R EVO 11

• Wire connection:

  • Type of connection:

    Stäubli MC4-Evo 2 connector

  • Wire cross-section, min.:

    2,5 mm²

  • Wire cross-section, max.:

    6 mm²

• Cable entry:

  • Number of cable entries:

    4

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Tension clamp connection with actuator

  • Flexible, max. H05(07) V-K:

    1,5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1,5 mm²

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Tension clamp connection with actuator

  • Flexible, max. H05(07) V-K:

    1,5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1,5 mm²

• Wire connection:

  • Type of connection:

    Stäubli MC4-Evo 2 connector

  • Compatible cable crossection:

    TÜV 2 Pfg1169/08.07

  • Wire cross-section, min.:

    2,5 mm²

  • Wire cross-section, max.:

    6 mm²

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Screw terminal connectors

  • Flexible, max. H05(07) V-K:

    1,5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1,5 mm²

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Screw terminal connectors

  • Flexible, max. H05(07) V-K:

    1,5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1,5 mm²

Automatic ON and OFF switching fireman switch for the connection to 2 MPP tracker in the inverter.
Suitable for remote disconnection of the DC side by the fire department.
Max. string voltage Uoc: 1100V

Integrated surge protection with 2 class I+II combined arresters with signal contact.
Suitable for protection against overvoltages in a photovoltaic system according to EN 51643-32.

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
1 output, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2:
identical to MPP1

DC fireman switch:
Switching off by undervoltage tripping.
Automatic reconnection after the control voltage (230 V AC) is applied again.
With signal contact.

Connection of the fireman switch control line 230 VAC via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm².
Connection of the signal contact 24 VDC via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm².
Protection class: IP65.
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 236x200x132mm.

Approval according to low voltage switchgear IEC 61439-1:2011 and EN 61439-2:2011