LXXX 15.00/03/90F 4.5SN BK BX
LXXX 15.00/03/90F 4.5SN BK BX
Product image
LXXX 15.00/03/90F 4.5SN BK BX
Product image
LXXX 15.00/03/90F 4.5SN BK BX
Dimensional drawing
LXXX 15.00/03/90F 4.5SN BK BX
Graph
LXXX 15.00/03/90F 4.5SN BK BX
Graph
LXXX 15.00/03/90F 4.5SN BK BX
Graph
Increased power reserves
Optimised application safety
LXXX 15.00/03/90F 4.5SN BK BX
Product benefits
Increased power reserves
Optimised application safety
LXXX 15.00/03/90F 4.5SN BK BX

LXXX 15.00/03/90F 4.5SN BK BX

Printed circuit board terminals, 15.00 mm, Number of poles: 3, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box

Product ID 1047300000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Verwante producten 5
Approvals General ordering data Dimensions and weights Environmental Product Compliance Karakteristiska systemvärden Material data Conductors suitable for connection Номинальные характеристики по IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Omologazioni
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
N° certificato (UR)
E60693 

General ordering data

Versione
Printed circuit board terminals, 15.00 mm, Number of poles: 3, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box 
주문 번호
1047300000 
Tipo
LXXX 15.00/03/90F 4.5SN BK BX 
GTIN (EAN)
4032248783854 
CPZ
10 items
Product data
IEC: 1000 V / 150 A / 0.5 - 50 mm²
UL: 600 V / 126 A / AWG 20 - AWG 1 
Packaging
Box 

Dimensions and weights

Profondità
31 mm
깊이 (인치)
1,22 inch
Posizione verticale
56 mm
Height (inches)
2,205 inch
Height of lowest version
51,5 mm
Larghezza
75 mm
Width (inches)
2,953 inch
순중량
95,6 g

Environmental Product Compliance

Stato conformità RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Karakteristiska systemvärden

Famiglia prodotti
OMNIMATE Power - series LXXX 
Tecnica di collegamento cavi
Clamping yoke connection 
Montaggio su circuito stampato
THT solder connection 
Direzione d'uscita del conduttore
90° 
Passo in mm (P)
15 mm
Passo in pollici (P)
0,591 "
Numero di poli
3 
핀 시리즈 수량
1 
assemblabile da parte del cliente
No 
Number of rows
1 
Lunghezza spina a saldare (l)
4,5 mm
Dimensioni del codolo a saldare
1.2 x 1.2 mm 
Diametro foro di equipaggiamento (D)
1,6 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
폴당 용접 핀 수
4 
스크류드라이버 블레이드
1.2 x 6.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
2,5 Nm
Tightening torque, max.
4 Nm
Clamping screw
M 6 
Stripping length
18 mm
L1 in mm
30 mm
L1 in inches
1,181 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 

Material data

절연재
Wemid (PA) 
컬러 코드
black 
컬러 차트(유사)
RAL 9011 
절연재 그룹
I 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 600 
UL 94 가연성 등급
V-0 
접점 재질
Cu-alloy 
접점 표면
tinned 
코팅
4-6 μm SN 
용접 결선의 레이어 구조
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

클램프 범위, 최소
0,5 mm²
클램프 범위, 최대
50 mm²
결선 단면규격 AWG, 최소
AWG 20 
Sezione di collegamento cavo AWG, max.
AWG 1 
단선, 최소 H05(07) V-U
0,5 mm²
단선, 최대 H05(07) V-U
16 mm²
꼬임, 최소 H07V-R
6 mm²
stranded, 최대 H07V-R
50 mm²
연선, 최소 H05(07) V-K
0,5 mm²
연선, 최대 H05(07) V-K
35 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0,5 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
35 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0,5 mm²
페럴 포함, DIN 46228 pt 1, 최대
35 mm²
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019180000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004090000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019210000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004110000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565700000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004130000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      10 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0565800000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0379300000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      16 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0566000000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0375200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565600000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004070000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      35 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        19 mm
    • Recommended wire-end ferrule:
      9019320000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0368900000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      50 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004210000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Номинальные характеристики по IEC

пройдены испытания по стандарту
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
150 A
정격 전류, 극 수(Tu=40°C)
150 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
1 000 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
1 000 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
1 000 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
8 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
8 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
8 kV

Rated data acc. to CSA

Intézet (CSA)
CSA 
Tanúsítvány száma (CSA)
200039-1198743 
Névleges feszültség (B felhasználási csoport / CSA)
600 V
Névleges feszültség (C felhasználási csoport / CSA)
600 V
Tensione nominale (Gruppo D / CSA)
600 V
Corrente nominale (Gruppo B / CSA)
127 A
Corrente nominale (Gruppo C / CSA)
127 A
Corrente nominale (Gruppo D / CSA)
5 A
Sezione di collegamento cavo AWG, min.
AWG 20 
Sezione di collegamento cavo AWG, max.
AWG 1 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Intézet (UR)
UR 
Tanúsítvány száma (UR)
E60693 
Tensione nominale (Gruppo B / UL 1059)
600 V
Tensione nominale (Gruppo C / UL 1059)
600 V
Corrente nominale (Gruppo B / UL 1059)
126 A
정격 전류(사용 그룹 C / UL 1059)
126 A
와이어 단면적, AWG, 최소
AWG 20 
Sezione di collegamento cavo AWG, max.
AWG 1 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Packing

Imballaggio
Box 
Lunghezza VPE
196 mm
Larghezza VPE
165 mm
Altezza VPE
63 mm

Type tests

Test: Durabilità delle siglature
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, type of material, pitch, date clock, approval marking CSA, approval marking UL, durability
  • Evaluation:
    available
Test: Sezione bloccabile
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 16 mm²
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      AWG 10/1
    • Type of conductor and conductor cross-section:
      AWG 1/19
    • Type of conductor and conductor cross-section:
      H07V-R50
    • Type of conductor and conductor cross-section:
      H07V-K35
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    2.0 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    DIN EN 60999 section 8.5 / 04.94
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    ≥ 90N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    > 236 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    > 190 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • IP 20 from 16 mm² to 50 mm²
  • The test point can only be used as potential-pickup point.
  • Wire-end ferrules are mandatory for stranded wires with more than 19 strands.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01