LMFS 5.00/12/90 3.5SN OR BX
Produktillustration
LMFS 5.00/12/90 3.5SN OR BX
Imagen de producto
LMFS 5.00/12/90 3.5SN OR BX
Dimensional drawing
LMFS 5.00/12/90 3.5SN OR BX
Graph
LMFS 5.00/12/90 3.5SN OR BX
Wykres
LMFS 5.00/12/90 3.5SN OR BX
Преимущество изделия
Optional conductor outlet direction
Stable mechanical design
LMFS 5.00/12/90 3.5SN OR BX
Produktfördel
High reliability of the current capacity
LMFS 5.00/12/90 3.5SN OR BX
Produktfördel
Direct conductor entry
Cross section up to 2.5 mm²
LMFS 5.00/12/90 3.5SN OR BX
Product benefits
Maintenance through test point

LMFS 5.00/12/90 3.5SN OR BX

Printed circuit board terminals, 5.00 mm, Number of poles: 12, 90°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Clamping range, max. : 2.5 mm², Box

Nr. produktu 1332070000
Pobierz kartę katalogową Engineering Support Product Downloads
Příslušenství 1 Příbuzné výrobky 13
Omologazioni General ordering data Dimensioni e pesi 環境製品コンプライアンス Parametri del sistema Dati del materiale Conduttori adatti al collegamento Dati di dimensionamento secondo IEC Rated data acc. to CSA Rated data acc. to UL 1059 Imballaggio Type tests Important note Classifications

Omologazioni

Omologazioni
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
N° certificato (cURus)
E60693 

General ordering data

Versione
Printed circuit board terminals, 5.00 mm, Number of poles: 12, 90°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Clamping range, max. : 2.5 mm², Box 
N. d’ordine
1332070000 
Tipo
LMFS 5.00/12/90 3.5SN OR BX 
GTIN (EAN)
4050118135473 
CPZ
25 items
Product data
IEC: 400 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 
Packaging
Box 

Dimensioni e pesi

Profondità
15,2 mm
Profondità (pollici)
0,598 inch
Posizione verticale
18,3 mm
Height (inches)
0,72 inch
Height of lowest version
14,8 mm
Larghezza
62,7 mm
Width (inches)
2,468 inch
Peso netto
15,85 g

環境製品コンプライアンス

Stato conformità RoHS
準拠 (免除なし) 
REACH SVHC
No SVHC above 0.1 wt% 

Parametri del sistema

Famiglia prodotti
OMNIMATE Signal - Serie LMF 
Tecnica di collegamento cavi
PUSH IN 
Montaggio su circuito stampato
THT solder connection 
Direzione d'uscita del conduttore
90° 
Passo in mm (P)
5 mm
Passo in pollici (P)
0,197 "
Numero di poli
12 
Numero di serie di poli
1 
assemblabile da parte del cliente
No 
Number of rows
1 
Numero massimo di poli ordinabili per fila
24 
Lunghezza spina a saldare (l)
3,5 mm
Dimensioni del codolo a saldare
d = 0.8 mm 
Diametro foro di equipaggiamento (D)
1,1 mm
Tolleranza diametro di equipaggiamento (D)
+ 0,1 mm 
Numero di codoli a saldare per polo
2 
Lama cacciavite
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Stripping length
10 mm
L1 v mm
55 mm
L1 v palcích
2,166 "
Ochrana bezpečná proti dotyku dle normy DIN VDE 0470
IP 20 
Ochrana bezpečná proti dotyku dle normy DIN VDE 57 106
Bezpečné před dotykem prstů 
Stupeň krytí
IP20 

Dati del materiale

Materiale isolante
Wemid (PA) 
Colori
orange 
Tabella dei colori (simile)
RAL 2000 
Comparative Tracking Index (CTI)
≥ 600 
Classe d'infiammabilità UL 94
V-0 
Materiale dei contatti
Cu-alloy 
Superficie dei contatti
tinned 
Rivestimento
4-6 μm SN 
Tipo di stagnatura
matt 
Struttura a strati del collegamento a saldare
4...8 µm Sn matt 
Skladovací teplota, min.
-40 °C
Skladovací teplota, max.
70 °C
Provozní teplota, min.
-50 °C
Provozní teplota, max.
120 °C
Teplotní rozsah, instalace, min.
-25 °C
Teplotní rozsah, instalace, max.
120 °C

Conduttori adatti al collegamento

Campo di sezioni, min.
0,2 mm²
Campo di sezioni, max.
2,5 mm²
Sezione di collegamento cavo AWG, min.
AWG 24 
Sezione di collegamento cavo AWG, max.
AWG 12 
rigido, min. H05(07) V-U
0,5 mm²
rigido, max. H05(07) V-U
2,5 mm²
Flessibile, min. H05(07) V-K
0,25 mm²
Flessibile, max. H05(07) V-K
2,5 mm²
con terminale AEH con collare DIN 46 228/4, min.
0,25 mm²
con terminale AEH con collare DIN 46 228/4, max.
2,5 mm²
con terminale, DIN 46228 pt 1, min.
0,25 mm²
con terminale a norma DIN 46 228/1, max.
2,5 mm²
Calibro a tampone secondo EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Conduttore innestabile
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025860000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9019100000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0186500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0635100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004080000
Testo di riferimento
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Dati di dimensionamento secondo IEC

Testato secondo lo standard
IEC 60664-1 
IEC 60947-7-4 
Corrente di dimensionamento, numero minimo di poli (Tu=20 °C)
24 A
Corrente di dimensionamento, numero massimo di poli (Tu=20 °C)
24 A
Corrente di dimensionamento, numero minimo di poli (Tu=40 °C)
24 A
Corrente di dimensionamento, numero massimo di poli (Tu = 40°C)
24 A
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
400 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
320 V
Tensione nominale con classe di sovratensione/grado di lordura III/3
250 V
Tensione di dimensionamento con classe di sovratensione/grado di lordura II/2
4 kV
Tensione di dimensionamento con classe di sovratensione/grado di lordura III/2
4 kV
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
4 kV
Portata transitoria
3 x 1s with 120 A 

Rated data acc. to CSA

Tensione nominale (Gruppo B / CSA)
300 V
Tensione nominale (Gruppo D / CSA)
300 V
Corrente nominale (Gruppo B / CSA)
20 A
Corrente nominale (Gruppo D / CSA)
10 A
Sezione di collegamento cavo AWG, min.
AWG 24 
Sezione di collegamento cavo AWG, max.
AWG 12 

Rated data acc. to UL 1059

Istituto (cURus)
CURUS 
N° certificato (cURus)
E60693 
Tensione nominale (Gruppo B / UL 1059)
300 V
Tensione nominale (Gruppo D / UL 1059)
300 V
Corrente nominale (Gruppo B / UL 1059)
20 A
Corrente nominale (Gruppo D / UL 1059)
10 A
Sezione di collegamento cavo AWG, min.
AWG 24 
Sezione di collegamento cavo AWG, max.
AWG 12 
Odkaz na hodnoty pro schválení
Specifikace jsou maximální hodnoty, podrobnosti viz příslušná certifikace. 

Imballaggio

Imballaggio
Box 
Lunghezza VPE
346 mm
Larghezza VPE
137 mm
Altezza VPE
31 mm

Type tests

Test: Durabilità delle siglature
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, pitch, approval marking UL, durability
  • Evaluation:
    passed
Test: Sezione bloccabile
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U1.5
    • Type of conductor and conductor cross-section:
      H07V-K1.5
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01