VPU III R 48V/4KV AC/DC
VPU III R 48V/4KV AC/DC
VPU III R 48V/4KV AC/DC
Electric symbol
Schematic circuit diagram

VPU III R 48V/4KV AC/DC

Surge voltage arrester, Low voltage, with remote contact, Single-phase

Product ID 1351600000
Openen in configurator
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 1 Verwante producten 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Caractéristiques de raccordement télésignalisation Allgemeine Daten Insulation coordination acc. to EN 50178 Datos nominales IEC / EN Data připojení Electrical data General data Garantía Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319252/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, with remote contact, Single-phase 
Order No.
1351600000 
Type
VPU III R 48V/4KV AC/DC 
GTIN (EAN)
4050118158533 
Qty.
1 items

Dimensions and weights

Depth
71,5 mm
Depth (inches)
2,815 inch
Height
102 mm
Height (inches)
4,016 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
69 g

Temperatures

Storage temperature
-40 °C...70 °C 
Operating temperature
-40 °C...70 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Caractéristiques de raccordement télésignalisation

Connection type
Collegamento a vite 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,2 mm²
Max. torque
0,5 Nm
Stripping length
5 mm

Allgemeine Daten

Colour
naranja 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Optical function display
Green LED = OK 
Red LED = arrester is defective 
replace 
Protection degree
IP20 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
telekommunikációs érintkezővel 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
II 

Datos nominales IEC / EN

Combined pulse UOC
4 kV
Corriente de fuga a Un
30 µA
Discharge current (type III)
3 kA
Energy coordination (≤10 m)
Type II 
Type III 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
16 A 
Integrated back-up fuse
No 
Max. continuous voltage, Uc (AC)
50 V 
Nätfrekvens vid 250 Vmax
50...60Hz 
Number of poles
2 
Névleges feszültség (AC)
48 V
PE conductor current IPE
30 µA
Protection level Up at IN (L/N-PE)
≤ 950 V 
Requirements category acc. to IEC 61643-11
Type III 
Requirements class, acc. to EN 61643-11
T3 
Response time / fallback time
≤ 100 ns 
Short-circuit current rating ISCCR
1,5 kA
Sieć niskiego napięcia
Single-phase 
Signalling contact
250 V 10 A 1 NC 
Standards
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
92 V
Voltage type
AC/DC 
정격 전류 IN
16 A
정격 전압(DC)
68 V 

Data připojení

Stripping length
7 mm
Type of connection
Screw connection 
Stripping length, rated connection
7 mm
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire cross-section, solid, min.
0,13 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5 mm²
Connection cross-section, stranded, min.
0,5 mm²
Connection cross-section, stranded, max.
2,5 mm²

Electrical data

Voltage type
AC/DC 

General data

Number of poles
2 
Protection degree
IP20 
Colour
orange 

Garantía

Time interval
5 años 

Classifications

ETIM 8.0
EC000942 
ETIM 9.0
EC000942 
ETIM 10.0
EC000942 
ECLASS 14.0
27-17-12-03 
ECLASS 15.0
27-17-12-03 

Tender specification sheets

Long specification
Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III R 48V is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the colour of the LEDs changes from green to red. The functional state is also displayed by a voltage-free signalling contact (NC contact). Rated voltage: 48 VAC/DC In/max (8/20 µs): 2 kA protection level < 0.95 kV load current Il: 16 A telecommunication output: contact NC: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU III R 48V Order No. 1351600000 or equivalent 
Short specification
Class III arrester with Uoc: 4 kV suitable for 48 V AC/DC mains systems. Protection level < 0.95 kV. With remote alert Type: Weidmüller VPU III R 48 V/4 kV Order no. 1351600000 or equivalent